Littelfuse Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
5KP6.0CA
詳細を表示 DataSheets

5KP6.0CA

Product Overview

Category: Electronic Component
Use: Surge Protection
Characteristics: High power handling, fast response time
Package: Axial leaded
Essence: Protects electronic circuits from voltage surges
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Voltage Rating: 6.0V
  • Power Dissipation: 5000W
  • Polarity: Unidirectional
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 5KP6.0CA is an axial leaded diode with two leads. The cathode lead is typically shorter than the anode lead.

Functional Features

  • Fast response time to transient over-voltage conditions
  • High power handling capability
  • Low clamping voltage

Advantages and Disadvantages

Advantages: - Provides effective protection against voltage surges - Fast response time helps in preventing damage to sensitive electronic components

Disadvantages: - Can degrade over time with repeated exposure to surges - May require replacement after significant surge events

Working Principles

The 5KP6.0CA operates based on the principle of avalanche breakdown. When a voltage surge occurs, the diode conducts and diverts excess current away from the protected circuit, thus limiting the voltage across it.

Detailed Application Field Plans

The 5KP6.0CA is commonly used in various electronic devices and systems that are susceptible to voltage surges, such as: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • 5KP5.0CA: 5.0V voltage rating, 5000W power dissipation
  • 5KP6.5CA: 6.5V voltage rating, 5000W power dissipation
  • 5KP7.0CA: 7.0V voltage rating, 5000W power dissipation

In conclusion, the 5KP6.0CA is a crucial component for protecting electronic circuits from voltage surges. Its high power handling and fast response time make it suitable for a wide range of applications, despite potential disadvantages related to degradation and replacement needs. Understanding its specifications, pin configuration, functional features, and alternative models is essential for effectively integrating it into electronic designs.

技術ソリューションにおける 5KP6.0CA の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of 5KP6.0CA in technical solutions:

  1. What is the 5KP6.0CA component used for?

    • The 5KP6.0CA is a transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage spikes and surges.

  2. What is the maximum peak pulse power dissipation of the 5KP6.0CA?

    • The maximum peak pulse power dissipation of the 5KP6.0CA is 5000 watts.

  3. What is the breakdown voltage of the 5KP6.0CA?

    • The breakdown voltage of the 5KP6.0CA is 6.0 volts.

  4. How does the 5KP6.0CA protect electronic circuits?

    • The 5KP6.0CA clamps the voltage across the protected circuit when it exceeds the breakdown voltage, diverting excess current away from the sensitive components.

  5. What are the typical applications of the 5KP6.0CA in technical solutions?

    • The 5KP6.0CA is commonly used in surge protection for telecommunications equipment, industrial control systems, and power supplies.

  6. Can the 5KP6.0CA be used for overvoltage protection in automotive applications?

    • Yes, the 5KP6.0CA can be used for overvoltage protection in automotive electronics, such as in-vehicle infotainment systems and engine control units.

  7. What is the response time of the 5KP6.0CA during a voltage surge?

    • The response time of the 5KP6.0CA is very fast, typically in the nanosecond range, providing quick protection against transient voltage events.

  8. Is the 5KP6.0CA suitable for high-frequency signal lines?

    • Yes, the 5KP6.0CA is suitable for high-frequency signal lines due to its low capacitance and fast response time.

  9. What are the environmental operating conditions for the 5KP6.0CA?

    • The 5KP6.0CA is designed to operate within a temperature range of -55°C to +175°C and can withstand harsh environmental conditions.

  10. Are there any specific layout considerations when integrating the 5KP6.0CA into a circuit?

    • It's important to minimize the length of the connections between the 5KP6.0CA and the protected circuit to reduce inductance and ensure optimal performance.

I hope these questions and answers provide a good overview of the application of 5KP6.0CA in technical solutions! If you have any more specific questions, feel free to ask.