Littelfuse Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
P6SMB180
詳細を表示 DataSheets

P6SMB180: Product Overview and Specifications

Introduction

P6SMB180 is a type of TVS (Transient Voltage Suppressor) diode, which belongs to the category of semiconductor devices used for surge protection in electronic circuits. This diode is designed to protect sensitive electronic components from voltage spikes and transient surges.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Surge protection in electronic circuits
  • Characteristics: Fast response time, low clamping voltage
  • Package: SMB (Surface Mount Diode)
  • Essence: Protecting electronic components from voltage spikes
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Voltage Rating: 180V
  • Peak Pulse Power: 600W
  • Breakdown Voltage: 200V
  • Operating Temperature Range: -55°C to +150°C
  • Mounting Type: Surface Mount

Detailed Pin Configuration

P6SMB180 typically has two pins for surface mounting onto a printed circuit board. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast response time to transient surges
  • Low clamping voltage to limit the voltage across the protected circuit
  • High surge current capability

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • Compact surface mount package

Disadvantages

  • Limited power dissipation capability compared to larger TVS diodes
  • Higher cost compared to standard diodes

Working Principles

P6SMB180 operates based on the principle of avalanche breakdown. When a voltage surge occurs, the diode rapidly conducts, diverting the excess current away from the protected circuit and limiting the voltage across it.

Detailed Application Field Plans

P6SMB180 is commonly used in various electronic systems, including: - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to P6SMB180 include: - P6SMB120: Lower voltage rating - P6SMB200: Higher voltage rating - P6SMBxxx (where xxx represents different voltage ratings)

In conclusion, P6SMB180 is a crucial component in protecting electronic circuits from voltage surges, offering fast response and effective clamping. Its compact size and high surge current capability make it suitable for a wide range of applications.

Word count: 345

技術ソリューションにおける P6SMB180 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the voltage rating of P6SMB180?

    • The voltage rating of P6SMB180 is 180 volts.

  2. What is the peak power dissipation of P6SMB180?

    • The peak power dissipation of P6SMB180 is 600 watts.

  3. What is the typical clamping voltage of P6SMB180?

    • The typical clamping voltage of P6SMB180 is 293 volts at 1 amp.

  4. What is the maximum reverse stand-off voltage of P6SMB180?

    • The maximum reverse stand-off voltage of P6SMB180 is 154 volts.

  5. What is the breakdown voltage of P6SMB180?

    • The breakdown voltage of P6SMB180 is 171 volts minimum.

  6. What is the package type of P6SMB180?

    • P6SMB180 comes in a DO-214AA (SMB) package.

  7. What are the typical applications for P6SMB180?

    • P6SMB180 is commonly used in surge protection for sensitive electronics, such as in telecommunications equipment, industrial control systems, and consumer electronics.

  8. What is the temperature range for P6SMB180?

    • P6SMB180 has an operating temperature range of -55°C to 150°C.

  9. Is P6SMB180 RoHS compliant?

    • Yes, P6SMB180 is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.

  10. What are the recommended mounting techniques for P6SMB180?

    • P6SMB180 can be mounted using surface mount techniques, and proper board layout and soldering practices should be followed for optimal performance.