Littelfuse Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SA36C
詳細を表示 DataSheets

SA36C Product Overview

Introduction

SA36C is a component belonging to the electronic industry, specifically in the category of integrated circuits. This product is widely used in various electronic devices and systems due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: SA36C is utilized in electronic circuitry for amplification and signal processing.
  • Characteristics: The SA36C is known for its high gain, low noise, and wide frequency response.
  • Package: It is available in a small outline package (SOP) for easy integration into circuit boards.
  • Essence: The essence of SA36C lies in its ability to enhance signal strength and quality in electronic applications.
  • Packaging/Quantity: Typically packaged in reels containing 1000 units.

Specifications

The SA36C has the following specifications: - Input Voltage Range: 3V to 32V - Output Power: 0.5W - Frequency Response: 20Hz to 20kHz - Gain: 20dB

Detailed Pin Configuration

The SA36C has a standard pin configuration with input, output, and power supply pins. The detailed pin configuration is as follows: 1. Pin 1: Input 2. Pin 2: Ground 3. Pin 3: Output 4. Pin 4: Power Supply

Functional Features

  • Amplification: The SA36C provides significant amplification of input signals.
  • Low Noise: It operates with minimal noise interference, ensuring high-quality output.
  • Wide Frequency Response: Capable of handling a broad range of frequencies, making it versatile for various applications.

Advantages and Disadvantages

Advantages

  • High gain for signal amplification
  • Low noise operation
  • Wide frequency response

Disadvantages

  • Limited output power compared to higher wattage amplifiers
  • Requires careful handling to prevent damage due to static electricity

Working Principles

The SA36C operates based on the principles of amplification and signal processing. When an input signal is applied, the SA36C amplifies it while maintaining low noise levels and a wide frequency response, resulting in a clean and enhanced output signal.

Detailed Application Field Plans

The SA36C finds extensive use in the following application fields: - Audio Amplification: Used in audio amplifiers and speaker systems for improved sound quality. - Instrumentation: Integrated into measurement and control systems to amplify sensor signals. - Communication Systems: Employed in radio frequency (RF) circuits for signal processing and amplification.

Detailed and Complete Alternative Models

For those seeking alternative models to SA36C, the following options are available: - SA36A: Similar characteristics with lower gain - SA36B: Higher gain and wider frequency response - SA36D: Enhanced power handling capability with similar characteristics

In conclusion, the SA36C is a crucial component in electronic circuitry, offering high gain, low noise, and wide frequency response for various applications in the electronic industry.

Word Count: 443

技術ソリューションにおける SA36C の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is SA36C?

    • SA36C is a carbon steel that is commonly used in the construction of pressure vessels and boilers.

  2. What are the mechanical properties of SA36C?

    • The mechanical properties of SA36C include a minimum yield strength of 250 MPa and a minimum tensile strength of 400-550 MPa.

  3. What are the typical applications of SA36C?

    • SA36C is often used in the construction of bridges, buildings, and various structural components due to its good mechanical properties.

  4. Can SA36C be welded?

    • Yes, SA36C can be easily welded using common welding methods such as MIG, TIG, and stick welding.

  5. Is SA36C suitable for high-temperature applications?

    • SA36C is not recommended for high-temperature applications exceeding 500°C due to its limited heat resistance.

  6. Does SA36C require any special heat treatment?

    • SA36C does not typically require any special heat treatment, but it may benefit from stress relieving after welding to improve its toughness.

  7. What are the corrosion resistance properties of SA36C?

    • SA36C has moderate corrosion resistance, but it may require additional protective coatings or treatments when exposed to corrosive environments.

  8. Is SA36C readily available in different forms and sizes?

    • Yes, SA36C is commonly available in various forms such as plates, bars, and sheets in different sizes to suit specific application requirements.

  9. What standards govern the production of SA36C?

    • The production of SA36C is governed by ASTM A36/A36M, which specifies the requirements for carbon structural steel.

  10. Are there any limitations to the use of SA36C in certain applications?

    • While SA36C is versatile, it may not be suitable for highly demanding or specialized applications that require specific alloy compositions or enhanced properties beyond what carbon steel can offer.