Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DS1236A-10
詳細を表示 DataSheets

DS1236A-10

Product Overview

Category

DS1236A-10 belongs to the category of integrated circuits (ICs).

Use

The DS1236A-10 is primarily used as a watchdog timer in electronic systems. It ensures the proper functioning of the system by monitoring its operation and resetting it if necessary.

Characteristics

  • Watchdog timer functionality
  • Low power consumption
  • Wide operating voltage range
  • Small package size
  • Easy integration into existing systems

Package

The DS1236A-10 is available in a compact 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of DS1236A-10 lies in its ability to prevent system malfunctions and ensure reliable operation by monitoring and resetting the system when needed.

Packaging/Quantity

The DS1236A-10 is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Watchdog Timeout Period: 10 seconds
  • Reset Pulse Width: 250ms
  • Quiescent Current: 20µA (typical)

Detailed Pin Configuration

The DS1236A-10 has the following pin configuration:

  1. GND (Ground)
  2. RESET (Reset Output)
  3. VCC (Supply Voltage)
  4. MR (Master Reset Input)
  5. WDI (Watchdog Input)
  6. NC (No Connection)
  7. NC (No Connection)
  8. NC (No Connection)

Functional Features

Watchdog Timer

The DS1236A-10 incorporates a watchdog timer that monitors the system's operation. If the system fails to provide a periodic input signal within the specified timeout period, the watchdog timer triggers a reset signal to restart the system.

Reset Output

The RESET pin provides an active-low reset signal to the system when triggered by the watchdog timer or the MR (Master Reset) input.

Master Reset Input

The MR pin allows an external signal to trigger a system reset. When a low-level signal is applied to this pin, the DS1236A-10 generates a reset pulse on the RESET pin.

Watchdog Input

The WDI pin is used to feed the periodic input signal to the watchdog timer. The system must provide a pulse to this pin within the specified timeout period to prevent a system reset.

Advantages and Disadvantages

Advantages

  • Ensures reliable system operation by monitoring and resetting the system if necessary.
  • Low power consumption helps in energy-efficient designs.
  • Wide operating voltage range allows compatibility with various systems.
  • Small package size enables easy integration into space-constrained applications.

Disadvantages

  • Limited timeout period may not be suitable for certain applications requiring longer monitoring intervals.
  • Lack of additional features beyond basic watchdog functionality.

Working Principles

The DS1236A-10 operates by continuously monitoring the system's operation through the watchdog input pin. It expects a periodic pulse from the system within the specified timeout period. If the pulse is not received, indicating a system malfunction, the watchdog timer triggers a reset signal to restart the system. Additionally, an external master reset input can also initiate a system reset.

Detailed Application Field Plans

The DS1236A-10 finds application in various fields where reliable system operation is critical. Some potential application areas include:

  1. Industrial Control Systems: Used to monitor and reset PLCs (Programmable Logic Controllers) and other industrial control equipment.
  2. Automotive Electronics: Ensures the proper functioning of automotive ECUs (Electronic Control Units) and safety systems.
  3. Medical Devices: Provides system integrity monitoring in medical equipment to prevent malfunctions.
  4. Home Automation: Used to monitor and reset smart home devices, ensuring uninterrupted operation.

Detailed and Complete Alternative Models

  1. DS1236A-5: Similar to DS1236A-10 but with a 5-second watchdog timeout period.
  2. DS1236A-15: Similar to DS1236A-10 but with a 15-second watchdog timeout period.
  3. DS1236A-20: Similar to DS1236A-10 but with a 20-second watchdog timeout period.

These alternative models offer different timeout periods to cater to specific application requirements.

Word count: 554 words

技術ソリューションにおける DS1236A-10 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of DS1236A-10 in technical solutions:

  1. Q: What is DS1236A-10? A: DS1236A-10 is a specific model of a digital temperature sensor and thermostat IC.

  2. Q: What are the key features of DS1236A-10? A: Some key features of DS1236A-10 include high accuracy temperature sensing, programmable temperature set points, and nonvolatile memory for storing configuration settings.

  3. Q: How can DS1236A-10 be used in technical solutions? A: DS1236A-10 can be used in various applications such as HVAC systems, industrial automation, consumer electronics, and medical devices where temperature monitoring and control are required.

  4. Q: How accurate is the temperature sensing capability of DS1236A-10? A: DS1236A-10 has a high accuracy temperature sensing capability with an accuracy of typically ±0.5°C.

  5. Q: Can DS1236A-10 be programmed to trigger certain actions based on temperature thresholds? A: Yes, DS1236A-10 allows users to program temperature set points and configure actions like activating alarms or controlling external devices when those thresholds are crossed.

  6. Q: Does DS1236A-10 have any built-in protection features? A: Yes, DS1236A-10 provides overtemperature and undertemperature fault detection, which can help protect the system from extreme temperature conditions.

  7. Q: Is DS1236A-10 compatible with microcontrollers or other digital interfaces? A: Yes, DS1236A-10 supports standard digital interfaces like I2C or SMBus, making it easy to integrate with microcontrollers or other digital systems.

  8. Q: Can DS1236A-10 be powered from a wide range of supply voltages? A: Yes, DS1236A-10 operates from a supply voltage range of 2.7V to 5.5V, allowing it to work with various power sources.

  9. Q: Does DS1236A-10 have any power-saving features? A: Yes, DS1236A-10 includes a low-power standby mode that reduces power consumption when the device is not actively measuring temperature.

  10. Q: Are there any evaluation boards or development kits available for DS1236A-10? A: Yes, Maxim Integrated, the manufacturer of DS1236A-10, provides evaluation boards and development kits that can help users quickly prototype and test their applications.

Please note that these questions and answers are based on general information about DS1236A-10 and may vary depending on specific use cases and requirements.