Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DS1708TEPA
詳細を表示 DataSheets

DS1708TEPA

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Temperature Sensor
  • Characteristics: High precision, digital output, low power consumption
  • Package: 8-pin PDIP (Plastic Dual In-line Package)
  • Essence: The DS1708TEPA is a temperature sensor IC that provides accurate temperature measurements in various applications.
  • Packaging/Quantity: Available in tubes of 50 units

Specifications

  • Temperature Range: -55°C to +125°C
  • Accuracy: ±0.5°C (typical) from -10°C to +85°C
  • Resolution: 9 bits (0.5°C per bit)
  • Supply Voltage: 2.7V to 5.5V
  • Current Consumption: 1µA (standby), 200µA (active)

Pin Configuration

The DS1708TEPA has the following pin configuration:

┌───┬───┐ │ 1 │ 8 │ │ 2 │ 7 │ │ 3 │ 6 │ │ 4 │ 5 │ └───┴───┘

  1. GND: Ground connection
  2. DQ: Data input/output
  3. VCC: Power supply voltage
  4. NC: No connection
  5. NC: No connection
  6. NC: No connection
  7. NC: No connection
  8. RESET: Reset input

Functional Features

  • Digital output: Provides temperature readings in a digital format, making it easy to interface with microcontrollers or other digital systems.
  • High precision: Offers accurate temperature measurements with a typical accuracy of ±0.5°C.
  • Low power consumption: Consumes only 1µA in standby mode, making it suitable for battery-powered applications.
  • Reset function: The RESET pin allows the user to reset the sensor and start a new temperature conversion.

Advantages and Disadvantages

Advantages: - High precision temperature measurements - Digital output for easy integration with digital systems - Low power consumption for battery-powered applications - Reset function for convenience

Disadvantages: - Limited temperature range (-55°C to +125°C) - 9-bit resolution may not be sufficient for some high-precision applications

Working Principles

The DS1708TEPA utilizes a temperature-to-digital conversion technique. It incorporates a temperature sensor, an analog-to-digital converter (ADC), and a digital interface. The temperature sensor measures the ambient temperature and converts it into an analog voltage. The ADC then converts this analog voltage into a digital value, which can be read through the DQ pin. The digital interface allows easy communication with microcontrollers or other digital devices.

Application Field Plans

The DS1708TEPA is suitable for various temperature sensing applications, including but not limited to:

  1. Environmental monitoring systems
  2. HVAC (Heating, Ventilation, and Air Conditioning) systems
  3. Industrial process control
  4. Medical equipment
  5. Automotive applications
  6. Consumer electronics

Alternative Models

Here are some alternative models that offer similar functionality:

  1. DS18B20: This is a popular 1-Wire digital temperature sensor with a wider temperature range and higher resolution.
  2. LM35: An analog temperature sensor that provides a linear voltage output proportional to the temperature.
  3. TMP36: Another analog temperature sensor with low power consumption and a wide operating voltage range.

These alternative models can be considered based on specific application requirements and preferences.

Word count: 389 words

技術ソリューションにおける DS1708TEPA の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of DS1708TEPA in technical solutions:

  1. Q: What is DS1708TEPA? A: DS1708TEPA is a temperature sensor and logger integrated circuit (IC) manufactured by Maxim Integrated. It is commonly used for monitoring and logging temperature data in various technical applications.

  2. Q: How does DS1708TEPA measure temperature? A: DS1708TEPA uses an internal temperature sensor to measure ambient temperature. The IC converts the analog temperature reading into a digital value that can be read and logged by a microcontroller or other digital device.

  3. Q: What is the operating temperature range of DS1708TEPA? A: DS1708TEPA has an operating temperature range of -55°C to +125°C, making it suitable for a wide range of environments and applications.

  4. Q: Can DS1708TEPA be used in battery-powered applications? A: Yes, DS1708TEPA is designed to operate with low power consumption, making it suitable for battery-powered applications where energy efficiency is important.

  5. Q: Does DS1708TEPA have built-in memory for data logging? A: Yes, DS1708TEPA has built-in non-volatile memory that can store up to 2048 temperature readings. This makes it convenient for standalone data logging applications.

  6. Q: How can I interface with DS1708TEPA to read temperature data? A: DS1708TEPA communicates using the 1-Wire protocol, which allows for simple serial communication with compatible microcontrollers or devices. Maxim Integrated provides libraries and example code to facilitate integration.

  7. Q: Can DS1708TEPA provide real-time temperature data? A: Yes, DS1708TEPA can provide real-time temperature data when connected to a microcontroller or device that can read and process the data in real-time.

  8. Q: Is DS1708TEPA suitable for high-precision temperature measurements? A: DS1708TEPA has an accuracy of ±2°C over the entire operating temperature range, which makes it suitable for many applications. However, for high-precision measurements, additional calibration may be required.

  9. Q: Can DS1708TEPA be used in industrial environments? A: Yes, DS1708TEPA is designed to withstand harsh environments and is suitable for use in industrial applications where temperature monitoring is required.

  10. Q: Are there any specific application notes or guidelines available for using DS1708TEPA? A: Yes, Maxim Integrated provides application notes and guidelines on their website that cover various aspects of using DS1708TEPA in different technical solutions. These resources can help users optimize their implementation and troubleshoot any issues they may encounter.