DS1836B-10
Product Overview
Category
The DS1836B-10 belongs to the category of electronic components.
Use
It is commonly used in various electronic devices for monitoring and controlling purposes.
Characteristics
- High precision and accuracy
- Low power consumption
- Compact size
- Wide operating temperature range
Package
The DS1836B-10 is available in a small surface mount package.
Essence
This product serves as a reliable and efficient solution for monitoring and control applications in electronic systems.
Packaging/Quantity
The DS1836B-10 is typically packaged in reels or tubes, with a quantity of 1000 units per package.
Specifications
- Supply Voltage: 2.7V to 5.5V
- Temperature Range: -40°C to +85°C
- Resolution: 10 bits
- Communication Interface: I2C
- Operating Current: 1.5mA (typical)
Detailed Pin Configuration
The DS1836B-10 has the following pin configuration:
| Pin Name | Function | |----------|----------| | VCC | Power supply input | | GND | Ground | | SDA | I2C data line | | SCL | I2C clock line | | ALERT | Interrupt output |
Functional Features
- Temperature monitoring and control
- Voltage monitoring and control
- Programmable threshold levels
- Non-volatile memory for storing settings
- Interrupt-based alert system
Advantages and Disadvantages
Advantages
- High precision measurement
- Flexible programmability
- Small form factor
- Wide operating temperature range
Disadvantages
- Requires I2C communication interface
- Limited resolution compared to some alternatives
Working Principles
The DS1836B-10 utilizes internal sensors to measure temperature and voltage levels. It communicates with the host system through the I2C interface, allowing for configuration and data retrieval. The device continuously monitors the specified parameters and triggers an alert if the measured values exceed the programmed threshold levels.
Detailed Application Field Plans
The DS1836B-10 finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Medical devices - Power management
Detailed and Complete Alternative Models
- DS1620
- MAX31855
- LM35
- TMP36
- MCP9808
These alternative models offer similar functionality and can be considered as substitutes for the DS1836B-10 in different applications.
In conclusion, the DS1836B-10 is a versatile electronic component that provides accurate monitoring and control capabilities for temperature and voltage. Its compact size, wide operating temperature range, and programmability make it suitable for various industries. While it requires an I2C interface and has limited resolution compared to some alternatives, its advantages outweigh these limitations.
技術ソリューションにおける DS1836B-10 の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of DS1836B-10 in technical solutions:
Q: What is DS1836B-10? A: DS1836B-10 is a digital temperature sensor and thermostat IC manufactured by Maxim Integrated. It provides accurate temperature measurements and can be used as a thermostat in various applications.
Q: What is the operating voltage range of DS1836B-10? A: The operating voltage range of DS1836B-10 is typically between 2.7V and 5.5V.
Q: How accurate is the temperature measurement provided by DS1836B-10? A: DS1836B-10 has a typical accuracy of ±2°C in the temperature range of -55°C to +125°C.
Q: Can DS1836B-10 be used for temperature control in HVAC systems? A: Yes, DS1836B-10 can be used for temperature control in HVAC (Heating, Ventilation, and Air Conditioning) systems.
Q: Does DS1836B-10 have any programmable temperature setpoints? A: Yes, DS1836B-10 allows you to set two programmable temperature setpoints for controlling heating and cooling operations.
Q: Can DS1836B-10 interface with microcontrollers or other digital devices? A: Yes, DS1836B-10 has an I2C interface that allows it to communicate with microcontrollers or other digital devices.
Q: Is DS1836B-10 capable of generating temperature alerts or alarms? A: Yes, DS1836B-10 has configurable temperature alert outputs that can be used to trigger alarms or notifications.
Q: Can DS1836B-10 be used in battery-powered applications? A: Yes, DS1836B-10 has a low power consumption and can be used in battery-powered applications.
Q: Does DS1836B-10 have any built-in non-volatile memory for storing configuration settings? A: No, DS1836B-10 does not have built-in non-volatile memory. Configuration settings need to be stored externally if required.
Q: Are there any evaluation boards or development kits available for DS1836B-10? A: Yes, Maxim Integrated provides evaluation boards and development kits that can help in the prototyping and testing of DS1836B-10 in various applications.
Please note that these answers are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.