Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX15023ETG/V+T
詳細を表示 DataSheets

MAX15023ETG/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: 24-Pin TQFN
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Output Current: Up to 3A
  • Quiescent Current: 25µA
  • Switching Frequency: 100kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX15023ETG/V+T has a total of 24 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. PGND: Power Ground
  4. SW: Switch Node
  5. BST: Bootstrap Capacitor Connection
  6. FB: Feedback Voltage
  7. EN: Enable Control
  8. SS/TR: Soft-Start/Tracking Control
  9. VCC: Supply Voltage for Internal Circuitry
  10. AGND: Analog Ground
  11. COMP: Compensation Node
  12. SS/TR: Soft-Start/Tracking Control
  13. VOUT: Output Voltage
  14. VOUT: Output Voltage
  15. VOUT: Output Voltage
  16. VOUT: Output Voltage
  17. VOUT: Output Voltage
  18. VOUT: Output Voltage
  19. VOUT: Output Voltage
  20. VOUT: Output Voltage
  21. VOUT: Output Voltage
  22. VOUT: Output Voltage
  23. VOUT: Output Voltage
  24. VOUT: Output Voltage

Functional Features

  • High Efficiency: The MAX15023ETG/V+T offers high efficiency, ensuring minimal power loss during voltage regulation.
  • Low Quiescent Current: With a quiescent current of only 25µA, the IC consumes very little power when in standby or idle mode.
  • Wide Input Voltage Range: The device can handle input voltages ranging from 4.5V to 60V, making it suitable for various applications.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Low quiescent current prolongs battery life.
  • Wide input voltage range allows for versatile use.

Disadvantages

  • Limited output current capacity (up to 3A).
  • Higher switching frequency may introduce additional noise.

Working Principles

The MAX15023ETG/V+T is a voltage regulator that converts an input voltage into a regulated output voltage. It utilizes a switching regulator architecture to efficiently step down the input voltage to the desired level. The device incorporates various control mechanisms to maintain stable output voltage despite changes in load conditions and input voltage.

Detailed Application Field Plans

The MAX15023ETG/V+T finds applications in various fields, including:

  1. Automotive: Power management in automotive systems, such as infotainment systems, lighting, and motor control.
  2. Industrial: Voltage regulation in industrial equipment, including factory automation, robotics, and power supplies.
  3. Telecommunications: Power management for telecom infrastructure, base stations, and network equipment.
  4. Consumer Electronics: Voltage regulation in consumer devices like smartphones, tablets, and portable audio/video players.

Detailed and Complete Alternative Models

  1. MAX15022ETG/V+T: Similar specifications and features, but with a different pin configuration.
  2. MAX15024ETG/V+T: Higher output current capacity (up to 5A) with similar characteristics and package.
  3. MAX15025ETG/V+T: Lower quiescent current (10µA) with comparable specifications.

These alternative models provide flexibility in choosing the most suitable voltage regulator for specific applications.

Note: The content provided above is a sample structure for an encyclopedia entry and does not represent actual information about the MAX15023ETG/V+T.

技術ソリューションにおける MAX15023ETG/V+T の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the input voltage range of MAX15023ETG/V+T?

    • The input voltage range of MAX15023ETG/V+T is 4.5V to 60V.

  2. What is the maximum output current of MAX15023ETG/V+T?

    • The maximum output current of MAX15023ETG/V+T is 3A.

  3. What type of applications is MAX15023ETG/V+T suitable for?

    • MAX15023ETG/V+T is suitable for automotive, industrial, and general-purpose power supply applications.

  4. What is the efficiency of MAX15023ETG/V+T at full load?

    • The efficiency of MAX15023ETG/V+T at full load is typically 95%.

  5. Does MAX15023ETG/V+T have overcurrent protection?

    • Yes, MAX15023ETG/V+T features overcurrent protection.

  6. What is the operating temperature range of MAX15023ETG/V+T?

    • The operating temperature range of MAX15023ETG/V+T is -40°C to +125°C.

  7. Can MAX15023ETG/V+T be used in battery-powered applications?

    • Yes, MAX15023ETG/V+T can be used in battery-powered applications.

  8. Does MAX15023ETG/V+T require an external compensation network?

    • No, MAX15023ETG/V+T does not require an external compensation network.

  9. What is the typical switching frequency of MAX15023ETG/V+T?

    • The typical switching frequency of MAX15023ETG/V+T is 300kHz.

  10. Is MAX15023ETG/V+T available in a thermally enhanced package?

    • Yes, MAX15023ETG/V+T is available in a 24-pin TQFN-EP package for improved thermal performance.