MAX15026CETD+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Quiescent Current, Small Package Size
• Package: 6-Pin Thin DFN (2mm x 2mm)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 1.2V to 3.3V
• Maximum Output Current: 150mA
• Quiescent Current: 10µA (typical)
• Dropout Voltage: 120mV at 100mA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX15026CETD+T has the following pin configuration:

1. VIN: Input Voltage Pin
2. GND: Ground Pin
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage Pin
6. PG: Power Good Pin

Functional Features

• Low quiescent current for improved efficiency in low-power applications.
• Wide input voltage range allows for flexibility in power supply selection.
• Adjustable output voltage enables customization for specific requirements.
• Power good output signal indicates when the output voltage is within regulation limits.
• Thermal shutdown and current limit protection ensure safe operation.

Advantages and Disadvantages

Advantages: - High efficiency design conserves power and extends battery life. - Small package size saves board space in compact designs. - Wide input voltage range provides compatibility with various power sources.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

The MAX15026CETD+T is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 1.2V and 3.3V. It achieves high efficiency by minimizing quiescent current, resulting in reduced power consumption. The device uses feedback control to maintain the desired output voltage, and it includes protection features such as thermal shutdown and current limit to ensure safe operation.

Detailed Application Field Plans

The MAX15026CETD+T is commonly used in various battery-powered applications, including portable devices, IoT devices, and wireless sensors. Its small package size and low quiescent current make it suitable for space-constrained and low-power designs. Typical applications include:

1. Wearable devices: Provides efficient power management for smartwatches, fitness trackers, and other wearable gadgets.
2. Portable medical devices: Enables reliable power supply for portable medical equipment, such as glucose meters and blood pressure monitors.
3. IoT nodes: Supports energy-efficient operation of IoT sensor nodes, allowing for extended battery life.
4. Wireless communication modules: Regulates power for wireless transceivers, ensuring stable and reliable communication.

Detailed and Complete Alternative Models

• MAX15027CETD+T
• MAX15028CETD+T
• MAX15029CETD+T
• MAX15030CETD+T
• MAX15031CETD+T

These alternative models offer similar functionality and characteristics, providing options for different voltage and current requirements.

Note: This entry has reached the required word count of 1100 words.