Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX16992AUBB/V+
詳細を表示 DataSheets

MAX16992AUBB/V+

Product Overview

  • Belongs to: Integrated Circuits (ICs)
  • Category: Power Management IC
  • Use: The MAX16992AUBB/V+ is a step-down DC-DC converter designed for automotive applications.
  • Characteristics: It features high efficiency, wide input voltage range, and overcurrent protection.
  • Package: 10 µMAX package
  • Essence: The MAX16992AUBB/V+ is essential for providing regulated power supply in automotive electronic systems.
  • Packaging/Quantity: Available in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage: Adjustable from 0.8V to 0.9 x VIN
  • Output Current: Up to 2A
  • Switching Frequency: 100kHz to 2.2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16992AUBB/V+ has the following pin configuration: 1. VIN: Input Voltage 2. GND: Ground 3. FB: Feedback 4. EN: Enable 5. SW: Switch Node 6. PG: Power Good

Functional Features

  • High Efficiency: Provides efficient power conversion for automotive electronics.
  • Wide Input Voltage Range: Allows operation with varying input voltages in automotive systems.
  • Overcurrent Protection: Safeguards the circuit and connected devices from excessive current.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Overcurrent protection

Disadvantages

  • Limited output current compared to some other models
  • Higher cost compared to non-automotive DC-DC converters

Working Principles

The MAX16992AUBB/V+ operates by converting the input voltage from the automotive system to a regulated lower output voltage, which is suitable for powering various electronic components in the vehicle.

Detailed Application Field Plans

The MAX16992AUBB/V+ is commonly used in automotive applications such as: - Infotainment systems - Advanced driver-assistance systems (ADAS) - Lighting control modules - Engine control units (ECUs)

Detailed and Complete Alternative Models

Some alternative models to the MAX16992AUBB/V+ include: - MAX16993AUBB/V+ - MAX16994AUBB/V+ - MAX16995AUBB/V+

These alternatives offer similar functionality and are also designed for automotive power management applications.

This comprehensive entry provides detailed information about the MAX16992AUBB/V+, covering its specifications, features, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける MAX16992AUBB/V+ の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the input voltage range of MAX16992AUBB/V+?
    - The input voltage range of MAX16992AUBB/V+ is 4.5V to 36V.

  2. What is the maximum output current of MAX16992AUBB/V+?
    - The maximum output current of MAX16992AUBB/V+ is 1.5A.

  3. Can MAX16992AUBB/V+ be used in automotive applications?
    - Yes, MAX16992AUBB/V+ is suitable for automotive applications.

  4. What is the typical efficiency of MAX16992AUBB/V+?
    - The typical efficiency of MAX16992AUBB/V+ is 95%.

  5. Does MAX16992AUBB/V+ have overcurrent protection?
    - Yes, MAX16992AUBB/V+ features overcurrent protection.

  6. What is the operating temperature range of MAX16992AUBB/V+?
    - The operating temperature range of MAX16992AUBB/V+ is -40°C to +125°C.

  7. Is MAX16992AUBB/V+ compatible with both step-up and step-down configurations?
    - Yes, MAX16992AUBB/V+ can be used in both step-up and step-down configurations.

  8. What type of package does MAX16992AUBB/V+ come in?
    - MAX16992AUBB/V+ is available in a 10-pin µMAX package.

  9. Can MAX16992AUBB/V+ be used in LED driver applications?
    - Yes, MAX16992AUBB/V+ is suitable for LED driver applications.

  10. Does MAX16992AUBB/V+ require an external compensation network?
    - No, MAX16992AUBB/V+ has internal compensation and does not require an external compensation network.