Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX17083ETG+
詳細を表示 DataSheets

MAX17083ETG+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX17083ETG+ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management and battery charging applications.

Characteristics

  • Integrated circuit with power management capabilities
  • Designed for battery charging applications
  • Offers high efficiency and precision control
  • Provides protection features for safe operation

Package

The MAX17083ETG+ comes in a small form factor package, typically a Thin Quad Flat No-Lead (TQFN) package.

Essence

The essence of MAX17083ETG+ lies in its ability to efficiently manage power and charge batteries in electronic devices.

Packaging/Quantity

This product is usually packaged in reels or tubes, containing a specific quantity of units per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.5V to 5.5V
  • Maximum Charging Current: 2A
  • Operating Temperature Range: -40°C to +85°C
  • Control Interface: I2C

Detailed Pin Configuration

The MAX17083ETG+ has a total of 16 pins. Here is a detailed pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin
  5. SDA: I2C data pin
  6. SCL: I2C clock pin
  7. BAT: Battery connection pin
  8. TS: Temperature sense pin
  9. PROG: Programming pin
  10. STAT: Status output pin
  11. INT: Interrupt output pin
  12. NC: No connect pin
  13. NC: No connect pin
  14. NC: No connect pin
  15. NC: No connect pin
  16. NC: No connect pin

Functional Features

  • High-efficiency power management
  • Battery charging control and protection
  • Temperature sensing for thermal management
  • I2C interface for communication and control
  • Interrupt output for status monitoring

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Precise battery charging control ensures optimal performance
  • Comprehensive protection features enhance device safety
  • Compact package size allows for space-saving designs

Disadvantages

  • Limited input voltage range may not be suitable for all applications
  • Control interface limited to I2C may require additional components for compatibility with other interfaces

Working Principles

The MAX17083ETG+ operates by efficiently managing the power flow between the input source and the battery. It utilizes a combination of control algorithms, feedback mechanisms, and protection circuits to ensure safe and efficient charging of the battery. The I2C interface enables communication with a microcontroller or system controller for configuration and monitoring purposes.

Detailed Application Field Plans

The MAX17083ETG+ finds applications in various electronic devices that require power management and battery charging capabilities. Some potential application fields include:

  1. Portable consumer electronics (e.g., smartphones, tablets)
  2. Wearable devices (e.g., smartwatches, fitness trackers)
  3. Internet of Things (IoT) devices
  4. Industrial equipment and machinery
  5. Automotive electronics

Detailed and Complete Alternative Models

  1. MAX17082ETG+: Similar to MAX17083ETG+, but with a lower maximum charging current of 1A.
  2. MAX17084ETG+: Similar to MAX17083ETG+, but with a higher maximum charging current of 3A.
  3. MAX17085ETG+: Similar to MAX17083ETG+, but with additional features such as battery fuel gauge functionality.

These alternative models offer similar power management and battery charging capabilities, with slight variations in specifications and additional features.

Word count: 536 words

技術ソリューションにおける MAX17083ETG+ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX17083ETG+ in technical solutions:

  1. Q: What is the MAX17083ETG+? A: The MAX17083ETG+ is a fuel gauge IC (Integrated Circuit) designed for accurately measuring the remaining capacity of a battery.

  2. Q: What type of batteries can the MAX17083ETG+ work with? A: The MAX17083ETG+ is compatible with single-cell lithium-ion (Li+) batteries.

  3. Q: How does the MAX17083ETG+ measure battery capacity? A: The MAX17083ETG+ uses a combination of voltage, current, temperature, and other parameters to estimate the remaining capacity of the battery.

  4. Q: Can the MAX17083ETG+ be used in portable devices? A: Yes, the MAX17083ETG+ is commonly used in portable devices such as smartphones, tablets, wearables, and other battery-powered applications.

  5. Q: Does the MAX17083ETG+ require calibration? A: No, the MAX17083ETG+ is factory-calibrated and does not require additional calibration during normal operation.

  6. Q: Can the MAX17083ETG+ communicate with a microcontroller or host system? A: Yes, the MAX17083ETG+ supports I2C communication, allowing it to interface with microcontrollers or host systems.

  7. Q: What is the accuracy of the MAX17083ETG+ in measuring battery capacity? A: The MAX17083ETG+ has an accuracy of typically ±1% in estimating battery capacity.

  8. Q: Can the MAX17083ETG+ monitor battery health? A: Yes, the MAX17083ETG+ can monitor battery health by tracking parameters such as voltage, temperature, and charge/discharge cycles.

  9. Q: Does the MAX17083ETG+ provide overvoltage/undervoltage protection? A: No, the MAX17083ETG+ is primarily a fuel gauge IC and does not provide dedicated overvoltage/undervoltage protection. Additional circuitry may be required for that purpose.

  10. Q: Is the MAX17083ETG+ suitable for low-power applications? A: Yes, the MAX17083ETG+ has a low quiescent current consumption, making it suitable for low-power applications where battery life is critical.

Please note that these answers are general and may vary depending on specific application requirements.