Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX17116ETG+T
詳細を表示 DataSheets

MAX17116ETG+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current
  • Package: 24-Pin TQFN
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 57V
  • Maximum Output Current: 1A
  • Switching Frequency: 100kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX17116ETG+T has a total of 24 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Voltage
  4. EN: Enable
  5. SS/TRK: Soft-Start/Tracking
  6. SYNC: Synchronization
  7. VCC: Supply Voltage
  8. AGND: Analog Ground
  9. PGND: Power Ground
  10. BST: Bootstrap
  11. LX: Switch Node
  12. COMP: Compensation
  13. SS/TRK: Soft-Start/Tracking
  14. SYNC: Synchronization
  15. VCC: Supply Voltage
  16. AGND: Analog Ground
  17. PGND: Power Ground
  18. BST: Bootstrap
  19. LX: Switch Node
  20. COMP: Compensation
  21. SS/TRK: Soft-Start/Tracking
  22. SYNC: Synchronization
  23. VCC: Supply Voltage
  24. AGND: Analog Ground

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Low quiescent current reduces standby power consumption.
  • Adjustable output voltage provides flexibility.
  • Overcurrent and overtemperature protection for enhanced safety.

Advantages

  • High efficiency results in energy savings.
  • Wide input voltage range accommodates various power sources.
  • Low quiescent current prolongs battery life.
  • Compact package size saves board space.
  • Robust protection features ensure system reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Higher cost compared to non-integrated solutions.
  • Requires careful thermal management due to high power dissipation.

Working Principles

The MAX17116ETG+T is a voltage regulator IC that converts an input voltage into a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first stepped down using a high-frequency switch, and then filtered and regulated to provide a stable output voltage. The device incorporates various control mechanisms to maintain the desired output voltage under different load conditions.

Detailed Application Field Plans

The MAX17116ETG+T finds applications in various fields, including:

  1. Industrial Automation: Powering sensors, actuators, and control systems.
  2. Automotive Electronics: Providing power to infotainment systems, lighting, and motor control.
  3. Telecommunications: Regulating voltage for network equipment and base stations.
  4. Consumer Electronics: Powering portable devices, home appliances, and audio/video equipment.
  5. Renewable Energy: Controlling power conversion in solar panels and wind turbines.

Alternative Models

  1. MAX17117ETG+T: Similar specifications with additional fault protection features.
  2. MAX17118ETG+T: Higher maximum output current and wider input voltage range.
  3. MAX17119ETG+T: Lower quiescent current and extended temperature range.

These alternative models offer similar functionality but cater to specific requirements or offer additional features.

Word count: 386

技術ソリューションにおける MAX17116ETG+T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX17116ETG+T in technical solutions:

  1. Q: What is the MAX17116ETG+T? A: The MAX17116ETG+T is a step-down DC-DC converter IC designed for various technical applications.

  2. Q: What is the input voltage range of the MAX17116ETG+T? A: The input voltage range of the MAX17116ETG+T is typically between 4.5V and 60V.

  3. Q: What is the output voltage range of the MAX17116ETG+T? A: The output voltage range of the MAX17116ETG+T can be adjusted from 0.9V to 0.95 x VIN.

  4. Q: What is the maximum output current of the MAX17116ETG+T? A: The maximum output current of the MAX17116ETG+T is typically 2A.

  5. Q: Can the MAX17116ETG+T operate in a wide temperature range? A: Yes, the MAX17116ETG+T is designed to operate in a temperature range of -40°C to +125°C.

  6. Q: Does the MAX17116ETG+T have built-in protection features? A: Yes, the MAX17116ETG+T includes overcurrent protection, thermal shutdown, and undervoltage lockout features.

  7. Q: Can the MAX17116ETG+T be used in battery-powered applications? A: Yes, the low quiescent current and high efficiency of the MAX17116ETG+T make it suitable for battery-powered applications.

  8. Q: Is the MAX17116ETG+T easy to use in a circuit design? A: Yes, the MAX17116ETG+T is available in a compact and thermally enhanced package, making it easy to integrate into circuit designs.

  9. Q: Can the MAX17116ETG+T be used in automotive applications? A: Yes, the MAX17116ETG+T meets the requirements for automotive applications, including AEC-Q100 qualification.

  10. Q: Are there any evaluation boards or reference designs available for the MAX17116ETG+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help users quickly prototype and implement the MAX17116ETG+T in their applications.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.