Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX1760ETB+T
詳細を表示 DataSheets

MAX1760ETB+T

Product Overview

  • Category: Voltage Regulator
  • Use: Step-Up DC-DC Converter
  • Characteristics: High efficiency, low quiescent current, wide input voltage range
  • Package: 6-pin TDFN (Thin Dual Flat No-Lead) package
  • Essence: Power management IC
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 1.8V to 5.5V
  • Output Voltage: Adjustable up to 28V
  • Switching Frequency: 1.2MHz
  • Quiescent Current: 38µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback
  4. EN: Enable
  5. SW: Switch Node
  6. LX: Inductor Connection

Functional Features

  • Integrated power switch
  • Low dropout operation
  • Overcurrent and thermal shutdown protection
  • Soft-start capability

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Small package size

Disadvantages

  • Limited maximum output current
  • Higher cost compared to some alternatives

Working Principles

The MAX1760ETB+T is a step-up DC-DC converter that utilizes a high-efficiency synchronous rectified topology to provide a regulated output voltage from a wide range of input voltages. The internal power switch and control circuitry enable the device to achieve high efficiency and low quiescent current.

Detailed Application Field Plans

The MAX1760ETB+T is suitable for various battery-powered applications, including portable devices, IoT sensors, and handheld instruments. It can also be used in energy harvesting systems and other low-power applications where efficient voltage boosting is required.

Detailed and Complete Alternative Models

  • MAX17601: Similar specifications with different package options
  • MAX17220: Step-up converter with higher output current capability
  • MAX8566: Step-up converter with lower quiescent current

This comprehensive entry provides detailed information about the MAX1760ETB+T, covering its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける MAX1760ETB+T の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the input voltage range of MAX1760ETB+T?

    • The input voltage range of MAX1760ETB+T is 2.5V to 5.5V.

  2. What is the typical output current of MAX1760ETB+T?

    • The typical output current of MAX1760ETB+T is 100mA.

  3. What is the typical efficiency of MAX1760ETB+T?

    • The typical efficiency of MAX1760ETB+T is around 90%.

  4. Can MAX1760ETB+T be used in battery-powered applications?

    • Yes, MAX1760ETB+T is suitable for battery-powered applications due to its low input voltage range and low quiescent current.

  5. What are the typical applications of MAX1760ETB+T?

    • Typical applications of MAX1760ETB+T include portable devices, handheld equipment, and battery-powered systems.

  6. Does MAX1760ETB+T have built-in overcurrent protection?

    • Yes, MAX1760ETB+T features built-in overcurrent protection to safeguard the circuit and load.

  7. What is the operating temperature range of MAX1760ETB+T?

    • The operating temperature range of MAX1760ETB+T is typically -40°C to +85°C.

  8. Is MAX1760ETB+T suitable for space-constrained designs?

    • Yes, MAX1760ETB+T is available in a small, space-saving package, making it suitable for compact designs.

  9. Can MAX1760ETB+T be used in conjunction with other power management ICs?

    • Yes, MAX1760ETB+T can be used alongside other power management ICs to provide comprehensive power solutions.

  10. What are the key advantages of using MAX1760ETB+T in technical solutions?

    • The key advantages of using MAX1760ETB+T include its wide input voltage range, high efficiency, compact size, and suitability for battery-powered applications.