Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX232BASE+T

MAX232BASE+T

Product Overview

  • Category: Integrated Circuit
  • Use: MAX232BASE+T is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply.
  • Characteristics: The device is designed to interface between low-voltage logic and RS-232 voltage levels. It operates from a single 5V power supply with four external 0.1μF charge-pump capacitors.
  • Package: The MAX232BASE+T comes in a 16-pin SSOP package.
  • Essence: This product serves as an essential component for interfacing low-voltage logic to RS-232 communication signals.
  • Packaging/Quantity: The MAX232BASE+T is typically available in reels of 2500 units.

Specifications

  • Supply Voltage: 5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: 120kbps
  • Number of Drivers/Receivers: 2/2

Detailed Pin Configuration

The pin configuration for MAX232BASE+T is as follows: 1. VCC 2. C1+ 3. C1- 4. V+ 5. R1OUT 6. R1IN 7. GND 8. T1IN 9. T1OUT 10. V- 11. T2OUT 12. T2IN 13. R2IN 14. R2OUT 15. C2- 16. C2+

Functional Features

  • Dual Driver/Receiver
  • Capacitive Voltage Generator
  • Single 5V Supply Operation
  • Low Power Consumption

Advantages and Disadvantages

Advantages

  • Wide Operating Temperature Range
  • Low Power Consumption
  • Small Package Size

Disadvantages

  • Limited Data Rate

Working Principles

The MAX232BASE+T utilizes a capacitive voltage generator to convert the 5V logic levels to the higher voltage levels required for RS-232 communication. It also provides protection against overvoltage transients.

Detailed Application Field Plans

The MAX232BASE+T is commonly used in applications such as industrial automation, instrumentation, and data communication equipment where RS-232 communication is required.

Detailed and Complete Alternative Models

Some alternative models to MAX232BASE+T include MAX3232ESE+, SP3232EEN-L/TR, and ST3232EBDR.

This comprehensive entry provides a detailed overview of the MAX232BASE+T, covering its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける MAX232BASE+T の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is MAX232BASE+T?

    • MAX232BASE+T is a RS-232 transceiver that converts signals between the RS-232 voltage levels and TTL voltage levels.

  2. What is the operating voltage range of MAX232BASE+T?

    • The operating voltage range of MAX232BASE+T is typically between 4.5V to 5.5V.

  3. What is the maximum data rate supported by MAX232BASE+T?

    • MAX232BASE+T supports a maximum data rate of 120kbps.

  4. Can MAX232BASE+T be used for bidirectional communication?

    • Yes, MAX232BASE+T can be used for bidirectional communication as it has two drivers and two receivers.

  5. What are the typical applications of MAX232BASE+T?

    • MAX232BASE+T is commonly used in applications such as microcontroller interfacing, serial communication, and industrial automation.

  6. Does MAX232BASE+T require external capacitors?

    • Yes, MAX232BASE+T requires external capacitors for charge pump operation.

  7. What is the temperature range for operation of MAX232BASE+T?

    • The operating temperature range for MAX232BASE+T is typically between -40°C to 85°C.

  8. Is MAX232BASE+T compatible with 3.3V microcontrollers?

    • Yes, MAX232BASE+T is compatible with 3.3V microcontrollers with the use of level shifters or voltage dividers.

  9. Can MAX232BASE+T be used in battery-powered applications?

    • Yes, MAX232BASE+T can be used in battery-powered applications due to its low power consumption.

  10. Are there any ESD protection features in MAX232BASE+T?

    • Yes, MAX232BASE+T includes ESD protection on all pins to ensure reliability in harsh environments.