Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX4372HEUK+TG069
詳細を表示 DataSheets

MAX4372HEUK+TG069

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Current Sense Amplifier
  • Characteristics:
    • High accuracy and precision
    • Low offset voltage
    • Wide input voltage range
    • Small package size
  • Package: SOT23-5
  • Essence: The MAX4372HEUK+TG069 is a current sense amplifier designed for accurate measurement of current in various applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 28V
  • Input Common-Mode Voltage Range: -0.1V to +28V
  • Output Voltage Swing: 0V to VCC - 1.2V
  • Quiescent Current: 60µA (typical)
  • Gain Bandwidth Product: 500kHz (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX4372HEUK+TG069 has the following pin configuration:

____ IN- | | IN+ | | GND | | OUT | | VCC |____|

Functional Features

  • High Accuracy: The MAX4372HEUK+TG069 provides precise current measurements with low offset voltage, ensuring accurate results.
  • Wide Input Voltage Range: It can handle a wide range of input voltages, allowing for versatile applications.
  • Small Package Size: The SOT23-5 package offers a compact form factor, making it suitable for space-constrained designs.

Advantages and Disadvantages

Advantages: - High accuracy and precision - Wide input voltage range - Small package size

Disadvantages: - Limited output voltage swing - Relatively high quiescent current

Working Principles

The MAX4372HEUK+TG069 operates as a current sense amplifier by measuring the voltage drop across a shunt resistor in series with the load. It amplifies this voltage to provide an output proportional to the current flowing through the load. The amplifier's gain and offset are carefully calibrated to ensure accurate current measurements.

Detailed Application Field Plans

The MAX4372HEUK+TG069 is suitable for various applications, including but not limited to:

  1. Power Management: Current monitoring in power supplies, battery chargers, and DC-DC converters.
  2. Motor Control: Current sensing in motor drives, robotics, and industrial automation systems.
  3. Automotive Electronics: Current measurement in automotive lighting, HVAC systems, and electric vehicle charging stations.
  4. Consumer Electronics: Current monitoring in portable devices, audio amplifiers, and LED drivers.

Alternative Models

Here are some alternative models that offer similar functionality:

  1. INA219: High-side current sense amplifier with I2C interface.
  2. LT6105: Precision current sense amplifier with adjustable gain.
  3. AD8211: Wide input voltage range current shunt monitor.

These alternatives can be considered based on specific application requirements and design constraints.

Word count: 314 words

技術ソリューションにおける MAX4372HEUK+TG069 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX4372HEUK+TG069 in technical solutions:

  1. Q: What is the MAX4372HEUK+TG069? A: The MAX4372HEUK+TG069 is a high-side current-sense amplifier with an integrated shunt resistor.

  2. Q: What is the purpose of the MAX4372HEUK+TG069? A: The purpose of this device is to accurately measure current flowing through a load in various technical applications.

  3. Q: How does the MAX4372HEUK+TG069 work? A: It works by amplifying the voltage drop across the integrated shunt resistor, which is proportional to the current flowing through it.

  4. Q: What is the maximum current that can be measured using the MAX4372HEUK+TG069? A: The maximum current that can be measured is typically around 5A, but it may vary depending on the specific application.

  5. Q: Can the MAX4372HEUK+TG069 be used for both AC and DC current measurements? A: Yes, it can be used for both AC and DC current measurements.

  6. Q: What is the accuracy of the MAX4372HEUK+TG069? A: The accuracy of this device is typically within a few percentage points, but it may also depend on external factors such as noise and temperature.

  7. Q: Is the MAX4372HEUK+TG069 suitable for high-frequency applications? A: Yes, it is suitable for high-frequency applications due to its wide bandwidth and fast response time.

  8. Q: Can the MAX4372HEUK+TG069 be used in automotive applications? A: Yes, it is designed to operate in automotive environments and can be used for various automotive applications.

  9. Q: Does the MAX4372HEUK+TG069 require any external components? A: No, it does not require any external components as it already has an integrated shunt resistor.

  10. Q: What is the package type of the MAX4372HEUK+TG069? A: The MAX4372HEUK+TG069 is available in a SOT23-5 package, which is small and suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.