Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX4372TEUK+G035
詳細を表示 DataSheets

MAX4372TEUK+G035

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Current Sense Amplifier
  • Characteristics: High accuracy, low offset voltage, small package size
  • Package: SOT23-5
  • Essence: Amplifies and measures current in electronic circuits
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Common Mode Voltage Range: -0.1V to +28V
  • Output Voltage Swing: 0V to VCC-1.2V
  • Gain Bandwidth Product: 500kHz
  • Quiescent Current: 50µA
  • Offset Voltage: ±100µV
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX4372TEUK+G035 has a total of 5 pins:

  1. IN-: Inverting input
  2. IN+: Non-inverting input
  3. OUT: Output
  4. GND: Ground
  5. VCC: Power supply

Functional Features

  • High accuracy current sensing
  • Low offset voltage for precise measurements
  • Wide input common mode voltage range
  • Rail-to-rail output swing
  • Low quiescent current for power efficiency
  • Small package size for space-constrained applications

Advantages and Disadvantages

Advantages: - High accuracy measurement of current - Wide input voltage range allows for versatile applications - Low offset voltage ensures precise readings - Small package size saves board space

Disadvantages: - Limited gain bandwidth product may restrict high-frequency applications - Not suitable for high-current applications due to limited output voltage swing

Working Principles

The MAX4372TEUK+G035 is a current sense amplifier that measures the current flowing through a circuit. It amplifies the small voltage drop across a sense resistor and provides an output proportional to the current being measured. The amplifier operates with a low offset voltage, ensuring accurate measurements even at low currents. It has a wide input common mode voltage range, allowing it to be used in various applications. The rail-to-rail output swing ensures that the amplified signal is not clipped, providing accurate readings. The low quiescent current makes it suitable for battery-powered devices.

Detailed Application Field Plans

The MAX4372TEUK+G035 can be used in a wide range of applications, including:

  1. Battery management systems
  2. Power supplies and converters
  3. Motor control circuits
  4. Current monitoring in industrial equipment
  5. Overcurrent protection circuits
  6. Solar power systems
  7. LED lighting control

Detailed and Complete Alternative Models

  • INA219: High-side current sense amplifier with I2C interface
  • LT6105: Precision high-side current sense amplifier
  • AD8210: Wide bandwidth current shunt monitor
  • MAX4080: High-side current sense amplifier with integrated comparator
  • LTC6101: High voltage, high-side current sense amplifier

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 275 words

技術ソリューションにおける MAX4372TEUK+G035 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX4372TEUK+G035 in technical solutions:

  1. Q: What is the MAX4372TEUK+G035? A: The MAX4372TEUK+G035 is a high-side current-sense amplifier with an integrated shunt resistor.

  2. Q: What is the purpose of the MAX4372TEUK+G035? A: The purpose of this device is to accurately measure current flowing through a load in various technical applications.

  3. Q: How does the MAX4372TEUK+G035 work? A: It works by amplifying the voltage across the integrated shunt resistor, which is proportional to the current flowing through it.

  4. Q: What is the maximum current that can be measured using MAX4372TEUK+G035? A: The maximum current that can be measured depends on the specific variant of the MAX4372TEUK+G035. Please refer to the datasheet for the exact specifications.

  5. Q: Can the MAX4372TEUK+G035 be used in automotive applications? A: Yes, the MAX4372TEUK+G035 is suitable for automotive applications as it can operate over a wide temperature range and has built-in protection features.

  6. Q: Is the MAX4372TEUK+G035 compatible with microcontrollers or other digital systems? A: Yes, the output of the MAX4372TEUK+G035 is an analog voltage that can be easily interfaced with microcontrollers or other digital systems.

  7. Q: Does the MAX4372TEUK+G035 require external calibration? A: No, the MAX4372TEUK+G035 is factory calibrated and does not require any external calibration.

  8. Q: Can the MAX4372TEUK+G035 be used in high-frequency applications? A: Yes, the MAX4372TEUK+G035 has a wide bandwidth and can be used in high-frequency applications.

  9. Q: What is the supply voltage range for the MAX4372TEUK+G035? A: The supply voltage range for this device is typically between 2.7V and 5.5V.

  10. Q: Are there any application notes or reference designs available for the MAX4372TEUK+G035? A: Yes, Maxim Integrated provides application notes and reference designs on their website that can help with the implementation of the MAX4372TEUK+G035 in various technical solutions.

Please note that these answers are general and it's always recommended to refer to the datasheet and documentation provided by the manufacturer for specific details and guidelines.