Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX501BEWG
詳細を表示 DataSheets

MAX501BEWG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, adjustable output voltage
  • Package: 24-pin TSSOP package
  • Essence: Linear voltage regulator
  • Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.25V to 5.5V
  • Dropout Voltage: 120mV at 500mA load current
  • Maximum Output Current: 500mA
  • Line Regulation: ±0.05% typical
  • Load Regulation: ±0.1% typical
  • Quiescent Current: 75µA typical
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX501BEWG has a total of 24 pins, which are assigned specific functions as follows:

  1. VOUT: Output voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. NC: No connection
  6. NC: No connection
  7. NC: No connection
  8. NC: No connection
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection
  17. NC: No connection
  18. NC: No connection
  19. NC: No connection
  20. NC: No connection
  21. VIN: Input voltage pin
  22. NC: No connection
  23. NC: No connection
  24. NC: No connection

Functional Features

  • Adjustable output voltage through external resistors
  • Low dropout voltage ensures efficient power conversion
  • Excellent line and load regulation for stable output voltage
  • Thermal shutdown protection prevents overheating
  • Short-circuit current limit protects the device from damage

Advantages and Disadvantages

Advantages: - High efficiency operation - Wide input voltage range - Adjustable output voltage - Compact package size

Disadvantages: - Limited maximum output current (500mA) - Requires external resistors for voltage adjustment

Working Principles

The MAX501BEWG is a linear voltage regulator that operates by maintaining a constant output voltage regardless of changes in input voltage or load conditions. It achieves this by using a feedback mechanism that compares the output voltage to a reference voltage and adjusts the internal circuitry accordingly. The regulator uses a pass transistor to control the output voltage, and any excess voltage is dissipated as heat.

Detailed Application Field Plans

The MAX501BEWG is commonly used in various applications where a stable and adjustable voltage supply is required. Some typical application fields include:

  1. Battery-powered devices: Portable electronics, handheld instruments, and battery chargers.
  2. Automotive systems: Infotainment systems, navigation devices, and lighting controls.
  3. Industrial equipment: Sensors, actuators, and control systems.
  4. Communication devices: Wireless routers, modems, and network switches.
  5. Consumer electronics: Audio/video equipment, gaming consoles, and set-top boxes.

Detailed and Complete Alternative Models

  1. LM317: Adjustable voltage regulator with similar specifications and pin configuration.
  2. LT1086: Low dropout voltage regulator with higher maximum output current.
  3. ADP3339: Ultra-low quiescent current regulator suitable for battery-powered applications.
  4. TPS7A4700: High-performance voltage regulator with wide input voltage range.

These alternative models offer similar functionality and can be considered as substitutes for the MAX501BEWG in various applications.

Word count: 455 words

技術ソリューションにおける MAX501BEWG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX501BEWG in technical solutions:

  1. Question: What is the MAX501BEWG?
    Answer: The MAX501BEWG is a high-voltage, precision, programmable current source designed for use in various technical applications.

  2. Question: What is the maximum voltage that the MAX501BEWG can handle?
    Answer: The MAX501BEWG can handle a maximum voltage of up to 36V.

  3. Question: How precise is the current output of the MAX501BEWG?
    Answer: The MAX501BEWG provides a high level of precision with an accuracy of ±0.5% and a resolution of 14 bits.

  4. Question: Can the MAX501BEWG be programmed to provide different current levels?
    Answer: Yes, the MAX501BEWG is programmable and can be configured to provide a wide range of current levels based on the desired application.

  5. Question: What is the typical operating temperature range for the MAX501BEWG?
    Answer: The MAX501BEWG has a typical operating temperature range of -40°C to +85°C.

  6. Question: Is the MAX501BEWG suitable for battery-powered applications?
    Answer: Yes, the MAX501BEWG is designed to operate efficiently in battery-powered applications, offering low quiescent current and low dropout voltage.

  7. Question: Can the MAX501BEWG be used in both analog and digital control systems?
    Answer: Yes, the MAX501BEWG supports both analog and digital control interfaces, making it versatile for integration into various control systems.

  8. Question: Does the MAX501BEWG have any built-in protection features?
    Answer: Yes, the MAX501BEWG includes built-in protection features such as thermal shutdown, overcurrent protection, and reverse battery protection.

  9. Question: What is the maximum output current that the MAX501BEWG can provide?
    Answer: The MAX501BEWG can provide a maximum output current of up to 500mA.

  10. Question: Are there any evaluation kits available for the MAX501BEWG?
    Answer: Yes, Maxim Integrated provides evaluation kits for the MAX501BEWG, which include all the necessary components for testing and prototyping applications.

Please note that these questions and answers are general in nature and may vary depending on specific application requirements.