Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX5096AAUP+T
詳細を表示 DataSheets

MAX5096AAUP+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Voltage Step-Down DC-DC Converter
  • Package: 20-TSSOP (Thin Shrink Small Outline Package)
  • Essence: Efficient power conversion for various applications
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 76V
  • Output Voltage Range: 0.8V to 60V
  • Maximum Output Current: 1A
  • Switching Frequency: 100kHz to 2MHz
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX5096AAUP+T IC has a total of 20 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. SW: Switching node connection
  3. PGND: Power ground pin
  4. FB: Feedback pin for output voltage regulation
  5. COMP: Compensation pin for loop stability
  6. SS/TR: Soft-start and tracking control pin
  7. EN: Enable pin for turning the device on/off
  8. VCC: Supply voltage pin for internal circuitry
  9. AGND: Analog ground pin
  10. SYNC: Synchronization input pin
  11. BST: Bootstrap capacitor connection pin
  12. LX: Inductor connection pin
  13. LX: Inductor connection pin
  14. LX: Inductor connection pin
  15. LX: Inductor connection pin
  16. LX: Inductor connection pin
  17. LX: Inductor connection pin
  18. LX: Inductor connection pin
  19. LX: Inductor connection pin
  20. LX: Inductor connection pin

Functional Features

  • High voltage step-down DC-DC converter
  • Wide input voltage range for versatile applications
  • Adjustable output voltage with high precision
  • High efficiency for power conservation
  • Integrated soft-start and tracking control
  • Synchronization capability for noise reduction
  • Overcurrent and overtemperature protection

Advantages and Disadvantages

Advantages: - Wide input voltage range allows compatibility with various power sources - High efficiency results in reduced power consumption - Integrated protection features enhance reliability and safety - Compact package size enables space-saving designs

Disadvantages: - Limited maximum output current may restrict certain high-power applications - Higher switching frequency may introduce additional noise

Working Principles

The MAX5096AAUP+T is a high voltage step-down DC-DC converter that utilizes a switching regulator topology. It converts a higher input voltage to a lower output voltage efficiently by controlling the duty cycle of an internal switch. The device employs pulse-width modulation (PWM) techniques to regulate the output voltage accurately. It also incorporates various protection mechanisms to safeguard against overcurrent and overtemperature conditions.

Detailed Application Field Plans

The MAX5096AAUP+T is suitable for a wide range of applications, including but not limited to:

  1. Industrial automation systems
  2. Automotive electronics
  3. Telecommunications equipment
  4. Power distribution systems
  5. Battery-powered devices
  6. Renewable energy systems
  7. Medical equipment
  8. Consumer electronics

Detailed and Complete Alternative Models

  1. MAX5096AASA+: 8-SOIC (Small Outline Integrated Circuit) package, similar specifications
  2. MAX5096BASA+: 8-SOIC package, enhanced specifications
  3. MAX5096CASA+: 8-SOIC package, extended temperature range
  4. MAX5096DASA+: 8-SOIC package, higher maximum output current
  5. MAX5096EASA+: 8-SOIC package, lower switching frequency

These alternative models offer similar functionality with slight variations in package type, specifications, or additional features.

Word count: 443 words

技術ソリューションにおける MAX5096AAUP+T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX5096AAUP+T in technical solutions:

  1. Q: What is the MAX5096AAUP+T? A: The MAX5096AAUP+T is a voltage regulator IC (integrated circuit) designed for use in various technical solutions.

  2. Q: What is the input voltage range of the MAX5096AAUP+T? A: The input voltage range of the MAX5096AAUP+T is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of the MAX5096AAUP+T? A: The output voltage range of the MAX5096AAUP+T can be adjusted from 0.8V to 24V.

  4. Q: What is the maximum output current of the MAX5096AAUP+T? A: The MAX5096AAUP+T can provide a maximum output current of up to 500mA.

  5. Q: Is the MAX5096AAUP+T suitable for battery-powered applications? A: Yes, the MAX5096AAUP+T is suitable for battery-powered applications as it has low quiescent current and supports low-dropout operation.

  6. Q: Can the MAX5096AAUP+T handle high input voltages? A: Yes, the MAX5096AAUP+T can handle input voltages up to 28V, making it suitable for applications with higher voltage requirements.

  7. Q: Does the MAX5096AAUP+T have built-in protection features? A: Yes, the MAX5096AAUP+T includes built-in protection features such as thermal shutdown, overcurrent protection, and reverse battery protection.

  8. Q: Can the MAX5096AAUP+T be used in automotive applications? A: Yes, the MAX5096AAUP+T is automotive-grade and can be used in various automotive applications.

  9. Q: Does the MAX5096AAUP+T require external components for operation? A: Yes, the MAX5096AAUP+T requires a few external components such as input/output capacitors and resistors for voltage adjustment.

  10. Q: What package does the MAX5096AAUP+T come in? A: The MAX5096AAUP+T is available in a 20-pin TSSOP (Thin Shrink Small Outline Package) for easy integration into PCB designs.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.