MAX5096BATE+ - English Editing Encyclopedia Entry
Product Overview
Category
MAX5096BATE+ belongs to the category of integrated circuits (ICs).
Use
The MAX5096BATE+ IC is primarily used for voltage regulation and power management applications.
Characteristics
- The IC offers high efficiency and low dropout voltage.
- It provides accurate output voltage regulation.
- It has a wide input voltage range.
- The device operates at a high switching frequency, enabling compact designs.
- It includes built-in protection features such as thermal shutdown and current limiting.
Package
The MAX5096BATE+ IC is available in a small 16-pin TQFN package.
Essence
The essence of MAX5096BATE+ lies in its ability to regulate voltage efficiently and accurately, making it suitable for various power management applications.
Packaging/Quantity
The IC is typically sold in reels containing a quantity of 250 units per reel.
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.8V to 3.3V
- Maximum Output Current: 1A
- Dropout Voltage: 120mV at 500mA
- Switching Frequency: 2MHz
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MAX5096BATE+ IC has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- SS/TR: Soft-start/Tracking pin
- VOUT: Output voltage pin
- PGND: Power ground pin
- SW: Switching pin
- BST: Bootstrap pin
- COMP: Compensation pin
- SS/TR: Soft-start/Tracking pin
- VCC: Supply voltage pin
- GND: Ground pin
- GND: Ground pin
- GND: Ground pin
- GND: Ground pin
Functional Features
- High efficiency voltage regulation
- Accurate output voltage control
- Wide input voltage range
- Built-in protection features (thermal shutdown, current limiting)
- Compact design due to high switching frequency
Advantages and Disadvantages
Advantages
- High efficiency operation
- Accurate voltage regulation
- Wide input voltage range allows for versatile applications
- Compact design due to high switching frequency
- Built-in protection features enhance reliability
Disadvantages
- Limited maximum output current (1A)
Working Principles
The MAX5096BATE+ IC utilizes a switching regulator topology to regulate the output voltage. It employs a high-frequency switching transistor to convert the input voltage into a regulated output voltage. The feedback mechanism continuously monitors the output voltage and adjusts the duty cycle of the switching transistor to maintain the desired output voltage level.
Detailed Application Field Plans
The MAX5096BATE+ IC finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial automation - Automotive electronics - Telecommunications equipment
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the MAX5096BATE+ IC are: - LM2576-ADJ - LT1084CP-5 - TPS5430DDAR - ADP2302ARDZ-3.3
These alternatives can be considered based on specific requirements and design constraints.
In conclusion, the MAX5096BATE+ IC is a highly efficient voltage regulator with accurate output voltage control. Its wide input voltage range and compact design make it suitable for various power management applications. However, its limited maximum output current may restrict its use in high-power applications.
技術ソリューションにおける MAX5096BATE+ の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of MAX5096BATE+ in technical solutions:
Q: What is the MAX5096BATE+? A: The MAX5096BATE+ is a high-voltage, low-quiescent current linear regulator designed for various technical applications.
Q: What is the input voltage range of the MAX5096BATE+? A: The input voltage range of the MAX5096BATE+ is typically between 7V and 76V.
Q: What is the output voltage range of the MAX5096BATE+? A: The output voltage range of the MAX5096BATE+ can be adjusted from 1.25V to 60V using external resistors.
Q: What is the maximum output current of the MAX5096BATE+? A: The maximum output current of the MAX5096BATE+ is 150mA.
Q: Can the MAX5096BATE+ operate in a wide temperature range? A: Yes, the MAX5096BATE+ is designed to operate in a temperature range of -40°C to +125°C.
Q: Does the MAX5096BATE+ have built-in protection features? A: Yes, the MAX5096BATE+ includes overcurrent and thermal shutdown protection to ensure safe operation.
Q: Can the MAX5096BATE+ be used in battery-powered applications? A: Yes, the low quiescent current of the MAX5096BATE+ makes it suitable for battery-powered applications where power efficiency is crucial.
Q: Is the MAX5096BATE+ available in different package options? A: Yes, the MAX5096BATE+ is available in a small 8-pin TDFN package, which is suitable for space-constrained designs.
Q: Can the MAX5096BATE+ be used in automotive applications? A: Yes, the MAX5096BATE+ is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.
Q: Are there any evaluation kits or reference designs available for the MAX5096BATE+? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help users quickly prototype and implement the MAX5096BATE+ in their technical solutions.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.