Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX5974DETE+G2Z
詳細を表示 DataSheets

MAX5974DETE+G2Z

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Dissipation
  • Package: TDFN-14
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel / 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 3A
  • Switching Frequency: 300kHz to 2.2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX5974DETE+G2Z has a total of 14 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. FB: Feedback pin
  4. SS/TRK: Soft-start/Tracking pin
  5. GND: Ground pin
  6. PGND: Power ground pin
  7. AGND: Analog ground pin
  8. VCC: Supply voltage pin
  9. SW: Switch node pin
  10. BST: Bootstrap pin
  11. COMP: Compensation pin
  12. SS/TRK: Soft-start/Tracking pin
  13. FB: Feedback pin
  14. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Adjustable output voltage provides flexibility
  • Integrated protection features such as overcurrent and thermal shutdown
  • Soft-start and tracking functionality for smooth operation

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings
  • Wide input voltage range enables compatibility with various power sources
  • Compact package size allows for space-saving designs
  • Integrated protection features enhance system reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Higher cost compared to some alternative models

Working Principles

The MAX5974DETE+G2Z is a voltage regulator IC that converts an input voltage into a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency and low power dissipation. The input voltage is first stepped down and then regulated to provide a stable output voltage. The device incorporates control circuitry, power switches, and feedback mechanisms to maintain the desired output voltage despite variations in the input voltage and load conditions.

Detailed Application Field Plans

The MAX5974DETE+G2Z finds applications in various fields, including:

  1. Industrial Automation: Power management for control systems, motor drives, and sensors.
  2. Automotive Electronics: Voltage regulation for automotive infotainment systems, lighting, and powertrain components.
  3. Telecommunications: Power supply for network equipment, base stations, and communication devices.
  4. Consumer Electronics: Voltage regulation for portable devices, audio/video equipment, and home appliances.
  5. Renewable Energy: Power management for solar panels, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

  1. LM2596S-ADJ: Adjustable Buck Converter IC with similar specifications and package.
  2. LT1763-3.3: Low Dropout Regulator IC with fixed 3.3V output voltage.
  3. TPS54332: Synchronous Buck Converter IC with adjustable output voltage range.

These alternative models offer similar functionality and can be considered as substitutes for the MAX5974DETE+G2Z depending on specific requirements.

Word count: 443 words

技術ソリューションにおける MAX5974DETE+G2Z の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX5974DETE+G2Z in technical solutions:

1. What is the MAX5974DETE+G2Z? The MAX5974DETE+G2Z is a power management IC (PMIC) designed for use in technical solutions that require multiple power supply rails.

2. What are the key features of the MAX5974DETE+G2Z? Some key features of the MAX5974DETE+G2Z include integrated DC-DC converters, adjustable output voltage, overcurrent protection, thermal shutdown, and a small form factor package.

3. What is the input voltage range supported by the MAX5974DETE+G2Z? The MAX5974DETE+G2Z supports an input voltage range of 4.5V to 16V.

4. How many output channels does the MAX5974DETE+G2Z have? The MAX5974DETE+G2Z has four output channels.

5. What is the maximum output current per channel? Each output channel of the MAX5974DETE+G2Z can provide a maximum output current of up to 1.5A.

6. Can the output voltage be adjusted? Yes, the output voltage of each channel can be adjusted using external resistors.

7. Does the MAX5974DETE+G2Z have any built-in protection features? Yes, the MAX5974DETE+G2Z includes overcurrent protection and thermal shutdown features to protect against excessive current or temperature.

8. What is the operating temperature range of the MAX5974DETE+G2Z? The MAX5974DETE+G2Z can operate within a temperature range of -40°C to +85°C.

9. Can the MAX5974DETE+G2Z be used in battery-powered applications? Yes, the MAX5974DETE+G2Z is suitable for battery-powered applications as it supports a wide input voltage range and has low quiescent current.

10. What package does the MAX5974DETE+G2Z come in? The MAX5974DETE+G2Z is available in a 16-pin TQFN (Thin Quad Flat No-Lead) package.

Please note that these answers are general and may vary depending on the specific application and requirements.