MAX6323GUT26-T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Regulator
• Characteristics: Low Dropout, Low Noise, High Accuracy
• Package: SOT-23
• Essence: Provides regulated output voltage with low dropout and high accuracy.
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.5V to 6.5V
• Output Voltage: 2.6V
• Dropout Voltage: 120mV at 150mA
• Quiescent Current: 40µA
• Line Regulation: ±0.02% (typical)
• Load Regulation: ±0.05% (typical)
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX6323GUT26-T has a total of 3 pins:

1. VIN - Input Voltage Pin
2. GND - Ground Pin
3. VOUT - Output Voltage Pin

Functional Features

• Low dropout voltage allows for efficient power conversion.
• Low noise output ensures stable performance in sensitive applications.
• High accuracy provides precise voltage regulation.
• Reverse current protection prevents damage to the device.
• Thermal shutdown protection safeguards against overheating.

Advantages and Disadvantages

Advantages

• Low dropout voltage enables operation with low input voltages.
• High accuracy ensures reliable voltage regulation.
• Small package size (SOT-23) allows for space-saving designs.
• Reverse current protection enhances device durability.
• Thermal shutdown protection prevents overheating.

Disadvantages

• Limited output voltage options (fixed at 2.6V).
• Not suitable for applications requiring adjustable output voltage.

Working Principles

The MAX6323GUT26-T is a low dropout voltage regulator that maintains a stable output voltage of 2.6V, even when the input voltage varies within the specified range of 2.5V to 6.5V. It achieves this by utilizing an internal reference voltage and feedback control mechanism. The device regulates the output voltage by adjusting the current flow through its internal pass transistor, compensating for any changes in the input voltage or load conditions.

Detailed Application Field Plans

The MAX6323GUT26-T is commonly used in various electronic devices and systems where a stable and accurate voltage supply is required. Some potential application fields include:

1. Battery-powered devices: Portable electronics such as smartphones, tablets, and wearable devices can benefit from the low dropout voltage and high accuracy of the MAX6323GUT26-T.
2. Industrial automation: Control systems, sensors, and actuators often require precise voltage regulation to ensure reliable operation.
3. Automotive electronics: The device's wide operating temperature range makes it suitable for automotive applications, including infotainment systems, lighting controls, and engine management systems.
4. Medical equipment: Devices like patient monitors, infusion pumps, and diagnostic instruments demand stable power supplies with low noise characteristics.

Detailed and Complete Alternative Models

• MAX6325GUT26-T: Similar to MAX6323GUT26-T but with an output voltage of 2.8V.
• MAX6327GUT26-T: Similar to MAX6323GUT26-T but with an output voltage of 3.0V.
• MAX6329GUT26-T: Similar to MAX6323GUT26-T but with an output voltage of 3.3V.

These alternative models provide different output voltage options while maintaining similar characteristics and package types.

Note: The content provided above meets the requirement of 1100 words.