商品詳細は仕様をご覧ください。
MAX6324HUT23+ Product Overview
Introduction
The MAX6324HUT23+ belongs to the category of voltage reference products. This device is commonly used in electronic circuits to provide a stable and accurate voltage reference for analog-to-digital converters, digital-to-analog converters, and other precision analog circuits.
Basic Information Overview
- Category: Voltage Reference
- Use: Providing stable and accurate voltage reference
- Characteristics: High precision, low temperature coefficient, low noise
- Package: SOT-23
- Essence: Precision voltage reference
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Output Voltage: 2.048V
- Initial Accuracy: ±0.05%
- Temperature Coefficient (max): 15ppm/°C
- Operating Temperature Range: -40°C to +125°C
- Supply Voltage Range: 2.7V to 5.5V
- Quiescent Current: 90µA
Detailed Pin Configuration
The MAX6324HUT23+ has three pins: 1. VOUT: Output Voltage 2. GND: Ground 3. VIN: Input Voltage
Functional Features
- High precision output voltage
- Low temperature coefficient
- Low supply current
- Wide operating temperature range
- Small package size
Advantages and Disadvantages
Advantages
- High precision and accuracy
- Low temperature coefficient
- Wide operating temperature range
Disadvantages
- Limited output voltage options
- Relatively higher cost compared to standard voltage references
Working Principles
The MAX6324HUT23+ utilizes bandgap reference technology to provide a stable and accurate output voltage. It compensates for temperature variations and power supply fluctuations to ensure consistent performance in various operating conditions.
Detailed Application Field Plans
The MAX6324HUT23+ is widely used in the following applications: - Precision analog-to-digital converters - Digital-to-analog converters - Data acquisition systems - Battery management systems - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to the MAX6324HUT23+ include: - LT1236 from Analog Devices - REF5025 from Texas Instruments - ADR4520 from Analog Devices
In conclusion, the MAX6324HUT23+ is a high-precision voltage reference suitable for a wide range of precision analog circuit applications, offering stability and accuracy across varying operating conditions.
Word count: 346
技術ソリューションにおける MAX6324HUT23+ の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the MAX6324HUT23+?
- The MAX6324HUT23+ is a low-dropout, micropower voltage regulator designed for use in battery-powered applications.
What is the input voltage range for the MAX6324HUT23+?
- The input voltage range for the MAX6324HUT23+ is 2.5V to 6.5V.
What is the output voltage of the MAX6324HUT23+?
- The output voltage of the MAX6324HUT23+ is fixed at 2.3V.
What is the maximum output current of the MAX6324HUT23+?
- The maximum output current of the MAX6324HUT23+ is 300mA.
What are the typical applications for the MAX6324HUT23+?
- Typical applications for the MAX6324HUT23+ include portable and battery-powered devices, as well as low-power microcontroller and microprocessor-based systems.
What is the dropout voltage of the MAX6324HUT23+?
- The dropout voltage of the MAX6324HUT23+ is typically 240mV at 100mA load.
What is the operating temperature range of the MAX6324HUT23+?
- The operating temperature range of the MAX6324HUT23+ is -40°C to +125°C.
Does the MAX6324HUT23+ have built-in thermal shutdown protection?
- Yes, the MAX6324HUT23+ features built-in thermal shutdown protection to prevent damage from excessive heat.
Is the MAX6324HUT23+ available in a surface-mount package?
- Yes, the MAX6324HUT23+ is available in a space-saving, thermally efficient SOT23 package.
Can the MAX6324HUT23+ be used in automotive applications?
- Yes, the MAX6324HUT23+ is suitable for automotive applications, provided it meets the specific requirements and standards for automotive electronics.