Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX6362PUT23+T
詳細を表示 DataSheets

MAX6362PUT23+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Monitor
  • Characteristics: Low-power, Precision, Adjustable Threshold
  • Package: SOT-23
  • Essence: Monitors voltage levels and provides a digital output when the voltage exceeds a set threshold.
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 1.6V to 5.5V
  • Threshold Voltage Options: Adjustable from 1.22V to 5.0V in 100mV steps
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 3µA (typical)
  • Output Type: Active-Low Open-Drain
  • Accuracy: ±1.5% (typical)

Detailed Pin Configuration

The MAX6362PUT23+T has three pins:

  1. GND: Ground connection.
  2. TRIP: Input pin for monitoring the voltage level.
  3. RESET: Output pin that goes low when the monitored voltage exceeds the threshold.

Functional Features

  • Monitors the voltage level and generates a reset signal when it exceeds the set threshold.
  • Adjustable threshold voltage allows customization for different applications.
  • Low quiescent current makes it suitable for battery-powered devices.
  • Active-low open-drain output can be easily interfaced with other digital circuits.
  • Wide supply voltage range enables compatibility with various power sources.

Advantages and Disadvantages

Advantages

  • Precise voltage monitoring ensures reliable system operation.
  • Adjustable threshold voltage provides flexibility for different voltage levels.
  • Low-power consumption extends battery life in portable devices.
  • Small package size (SOT-23) saves board space.
  • Open-drain output simplifies interfacing with other components.

Disadvantages

  • Limited to monitoring voltage levels only, does not provide additional functionality.
  • Requires an external microcontroller or circuitry to respond to the reset signal.

Working Principles

The MAX6362PUT23+T operates by comparing the voltage at the TRIP pin with the internally set threshold voltage. When the monitored voltage exceeds the threshold, the RESET pin is pulled low, indicating a fault condition. The threshold voltage can be adjusted using external resistors connected to the TRIP pin.

Detailed Application Field Plans

The MAX6362PUT23+T finds applications in various fields, including:

  1. Battery-Powered Devices: Ensures safe operation by monitoring battery voltage and triggering a reset when it drops below a critical level.
  2. Power Management Systems: Monitors power supply voltages to protect sensitive components from overvoltage conditions.
  3. Industrial Control Systems: Provides voltage supervision for critical equipment, triggering alarms or shutdowns in case of voltage anomalies.
  4. Automotive Electronics: Monitors vehicle battery voltage to prevent deep discharge and ensure proper functioning of electrical systems.

Detailed and Complete Alternative Models

  1. MAX6362MUT23+T: Similar to MAX6362PUT23+T but available in a smaller µDFN package.
  2. MAX6362SUT23+T: Offers a wider supply voltage range (1.6V to 6.5V) compared to MAX6362PUT23+T.
  3. MAX6362RUT23+T: Provides a higher accuracy of ±1% (typical) compared to MAX6362PUT23+T.

These alternative models offer similar functionality but may have different package options, supply voltage ranges, or accuracy specifications.

Word count: 511 words

技術ソリューションにおける MAX6362PUT23+T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX6362PUT23+T in technical solutions:

  1. Q: What is the MAX6362PUT23+T? A: The MAX6362PUT23+T is a voltage monitor and reset circuit designed for use in various technical solutions.

  2. Q: What is the purpose of the MAX6362PUT23+T? A: The purpose of this device is to monitor the voltage level of a power supply and generate a reset signal when the voltage falls below a certain threshold.

  3. Q: How does the MAX6362PUT23+T work? A: It continuously monitors the voltage level using an internal voltage reference and comparator, and when the voltage drops below the set threshold, it asserts the reset signal.

  4. Q: What is the operating voltage range of the MAX6362PUT23+T? A: The operating voltage range is typically between 1.6V and 5.5V.

  5. Q: Can I adjust the voltage threshold for the reset signal? A: Yes, the voltage threshold can be adjusted using external resistors connected to the VTH pin.

  6. Q: Does the MAX6362PUT23+T have any built-in delay for the reset signal? A: Yes, it has a fixed delay of approximately 140ms to ensure stable power supply before releasing the reset signal.

  7. Q: Can the MAX6362PUT23+T be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as long as the operating voltage range is within the specified limits.

  8. Q: Is the MAX6362PUT23+T suitable for automotive applications? A: Yes, it is suitable for automotive applications as it meets the necessary automotive standards and has a wide operating temperature range.

  9. Q: Can I use multiple MAX6362PUT23+T devices in parallel to monitor different power supplies? A: Yes, you can use multiple devices in parallel to monitor different power supplies independently.

  10. Q: What package does the MAX6362PUT23+T come in? A: It comes in a small 6-pin SOT23 package, which is suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific requirements and application of the MAX6362PUT23+T in your technical solution.