MAX6382XR40D3+ Encyclopedia Entry
Product Overview
The MAX6382XR40D3+ belongs to the category of voltage regulators and is specifically designed for use in various electronic devices. This component offers unique characteristics, comes in a specific package, and has a defined essence. The packaging/quantity details are also essential for understanding its availability and usage.
Basic Information
- Category: Voltage Regulator
- Use: Electronic Devices
- Characteristics: High Efficiency, Low Dropout Voltage
- Package: 6-Pin SOT23
- Essence: Stable Voltage Regulation
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
The MAX6382XR40D3+ voltage regulator has the following specifications: - Input Voltage Range: 2.5V to 11V - Output Voltage: 4.0V - Maximum Output Current: 200mA - Dropout Voltage: 120mV at 100mA - Line Regulation: ±0.05% (Typical) - Load Regulation: ±0.1% (Typical)
Detailed Pin Configuration
The detailed pin configuration of MAX6382XR40D3+ is as follows: 1. GND 2. FB (Feedback) 3. EN (Enable) 4. NC (No Connection) 5. VOUT 6. VIN
Functional Features
The MAX6382XR40D3+ offers the following functional features: - Low Dropout Voltage - Thermal Shutdown Protection - Short-Circuit Protection - Low Quiescent Current
Advantages and Disadvantages
Advantages
- High Efficiency
- Wide Input Voltage Range
- Small Package Size
Disadvantages
- Limited Maximum Output Current
- Higher Dropout Voltage compared to some alternatives
Working Principles
The MAX6382XR40D3+ operates on the principle of regulating the output voltage within a specified range, ensuring a stable power supply to the connected electronic devices. It utilizes feedback control to maintain the desired output voltage despite variations in input voltage and load conditions.
Detailed Application Field Plans
The MAX6382XR40D3+ is suitable for a wide range of applications, including but not limited to: - Battery-Powered Devices - Portable Consumer Electronics - Industrial Control Systems - Automotive Electronics
Detailed and Complete Alternative Models
Some alternative models to MAX6382XR40D3+ include: - LM1117MPX-3.3/NOPB - LT1763CS8-3.3#PBF - ADP3338AKCZ-3.3-R7
In conclusion, the MAX6382XR40D3+ voltage regulator offers high efficiency and stable voltage regulation, making it suitable for various electronic applications. While it has certain limitations, its unique characteristics and functional features make it a valuable component in the realm of voltage regulation.
Word Count: 411
技術ソリューションにおける MAX6382XR40D3+ の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the MAX6382XR40D3+?
- The MAX6382XR40D3+ is a low-dropout (LDO) linear regulator designed to provide a regulated output voltage of 4.0V with a maximum input voltage of 6.5V.
What are the typical applications of the MAX6382XR40D3+?
- It is commonly used in battery-powered devices, portable equipment, and other applications where a stable 4.0V power supply is required.
What is the dropout voltage of the MAX6382XR40D3+?
- The dropout voltage is typically 300mV at full load, making it suitable for applications where the input voltage may be close to the desired output voltage.
What is the maximum output current of the MAX6382XR40D3+?
- The device can deliver up to 150mA of continuous output current, making it suitable for powering a wide range of low-power circuits and components.
What protection features does the MAX6382XR40D3+ offer?
- It includes overcurrent and thermal shutdown protection, ensuring the safety and reliability of the connected circuitry.
What is the operating temperature range of the MAX6382XR40D3+?
- The device is designed to operate within a temperature range of -40°C to +125°C, making it suitable for use in harsh environmental conditions.
Does the MAX6382XR40D3+ require any external components for operation?
- It requires only a small ceramic capacitor on the output for stability, simplifying the design and reducing component count.
Is the MAX6382XR40D3+ available in different package options?
- Yes, it is available in a tiny 5-pin SC70 package, which is ideal for space-constrained applications.
Can the MAX6382XR40D3+ be used in battery charging applications?
- While it is primarily designed as a voltage regulator, it can be used in conjunction with appropriate circuitry for battery charging applications.
Where can I find detailed technical information and application notes for the MAX6382XR40D3+?
- Detailed datasheets, application notes, and technical resources for the MAX6382XR40D3+ can be found on the manufacturer's website or through authorized distributors.