MAX6383XR26D3-T
Product Overview
Category
MAX6383XR26D3-T belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Package: XR26D3-T
- Essence: Voltage regulator
- Packaging/Quantity: Varies depending on supplier
Specifications
The specifications of MAX6383XR26D3-T are as follows:
- Input Voltage Range: 2.5V to 16V
- Output Voltage: 2.6V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.1% (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT23-3
Detailed Pin Configuration
The pin configuration of MAX6383XR26D3-T is as follows:
- Pin 1: GND (Ground)
- Pin 2: VOUT (Output Voltage)
- Pin 3: VIN (Input Voltage)
Functional Features
The functional features of MAX6383XR26D3-T include:
- Low dropout voltage
- High output accuracy
- Low quiescent current
- Thermal shutdown protection
- Short-circuit and reverse polarity protection
Advantages and Disadvantages
Advantages: - Wide input voltage range - Excellent line and load regulation - Small package size - Thermal shutdown protection ensures safety
Disadvantages: - Limited output current capacity - Higher dropout voltage compared to some alternatives
Working Principles
MAX6383XR26D3-T operates based on the principle of a linear voltage regulator. It regulates the output voltage by adjusting the resistance between the input and output terminals, ensuring a stable voltage output despite variations in the input voltage.
Detailed Application Field Plans
MAX6383XR26D3-T finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems - Communication equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to MAX6383XR26D3-T are: - LM1117-2.6 - LT1761-2.6 - MCP1702-2.6
These models offer similar functionality and specifications, providing options for different design requirements.
Note: The content provided above is approximately 250 words. Additional information may be required to reach the desired word count of 1100 words.
技術ソリューションにおける MAX6383XR26D3-T の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of MAX6383XR26D3-T in technical solutions:
Q: What is the MAX6383XR26D3-T? A: The MAX6383XR26D3-T is a voltage monitor and reset IC designed for monitoring power supply voltages in microcontroller-based systems.
Q: What is the operating voltage range of MAX6383XR26D3-T? A: The operating voltage range of MAX6383XR26D3-T is from 1.575V to 5.5V.
Q: How does MAX6383XR26D3-T provide voltage monitoring? A: MAX6383XR26D3-T monitors the voltage level of the power supply and asserts a reset signal when the voltage falls below a specified threshold.
Q: Can I adjust the voltage threshold for reset using MAX6383XR26D3-T? A: Yes, the voltage threshold for reset can be adjusted using external resistors connected to the VTH pin of MAX6383XR26D3-T.
Q: What is the typical reset timeout period of MAX6383XR26D3-T? A: The typical reset timeout period of MAX6383XR26D3-T is 140ms.
Q: Does MAX6383XR26D3-T have an open-drain output? A: Yes, MAX6383XR26D3-T has an open-drain RESET output that can be pulled up externally.
Q: Can MAX6383XR26D3-T operate in a wide temperature range? A: Yes, MAX6383XR26D3-T is designed to operate in a temperature range of -40°C to +85°C.
Q: What is the quiescent current consumption of MAX6383XR26D3-T? A: The quiescent current consumption of MAX6383XR26D3-T is typically 10µA.
Q: Is MAX6383XR26D3-T available in a small package? A: Yes, MAX6383XR26D3-T is available in a tiny SOT23-3 package.
Q: Can I use MAX6383XR26D3-T in battery-powered applications? A: Yes, MAX6383XR26D3-T's low quiescent current and wide operating voltage range make it suitable for battery-powered applications.
Please note that these answers are based on general information about the MAX6383XR26D3-T. For specific details and accurate information, it is recommended to refer to the datasheet or consult the manufacturer.