Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX6703TKA+TG71
詳細を表示 DataSheets

MAX6703TKA+TG71

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Reference
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT23-5
  • Essence: Provides a stable and accurate voltage reference for various electronic applications
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.1%
  • Temperature Coefficient: ±50ppm/°C
  • Dropout Voltage: 200mV
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6703TKA+TG71 has a total of five pins:

  1. VOUT: Output Voltage Pin
  2. GND: Ground Pin
  3. TRIM: Trim Pin for Fine-Tuning the Output Voltage
  4. BYP: Bypass Pin for Reducing Noise
  5. VIN: Input Voltage Pin

Functional Features

  • High Precision: The MAX6703TKA+TG71 provides an initial accuracy of ±0.1%, ensuring precise voltage references.
  • Low Dropout Voltage: With a dropout voltage of only 200mV, this IC can operate efficiently even with low input voltages.
  • Low Quiescent Current: The quiescent current of 45µA minimizes power consumption, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages: - High precision ensures accurate voltage references. - Low dropout voltage allows operation with low input voltages. - Low quiescent current minimizes power consumption.

Disadvantages: - Limited output voltage options (only 2.5V available). - SOT23-5 package may not be suitable for all applications.

Working Principles

The MAX6703TKA+TG71 is a voltage reference IC that generates a stable and accurate output voltage of 2.5V. It utilizes a bandgap voltage reference circuit to achieve high precision. The trim pin allows fine-tuning of the output voltage, while the bypass pin reduces noise for improved performance.

Detailed Application Field Plans

The MAX6703TKA+TG71 can be used in various electronic applications, including but not limited to: - Power management systems - Battery-powered devices - Precision measurement equipment - Analog-to-digital converters (ADCs) - Data acquisition systems

Detailed and Complete Alternative Models

  1. MAX6037CAUK+T: Voltage Reference IC with 1.25V Output Voltage
  2. MAX6190BESA+T: Voltage Reference IC with 4.096V Output Voltage
  3. MAX6126AASA50+: Voltage Reference IC with 5.0V Output Voltage
  4. MAX6225BEPA+: Voltage Reference IC with 2.048V Output Voltage
  5. MAX6350CSA+: Voltage Reference IC with Adjustable Output Voltage

These alternative models offer different output voltage options to suit specific application requirements.

Word count: 305 words

技術ソリューションにおける MAX6703TKA+TG71 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX6703TKA+TG71 in technical solutions:

1. What is the MAX6703TKA+TG71? - The MAX6703TKA+TG71 is a voltage detector IC manufactured by Maxim Integrated. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a specified threshold.

2. What is the operating voltage range of MAX6703TKA+TG71? - The operating voltage range of MAX6703TKA+TG71 is typically between 1.6V and 6.5V.

3. How does MAX6703TKA+TG71 work? - MAX6703TKA+TG71 works by comparing the input voltage with a reference voltage. If the input voltage crosses the threshold voltage, it triggers an output signal that can be used to control other components or circuits.

4. What is the output type of MAX6703TKA+TG71? - The MAX6703TKA+TG71 has an open-drain output, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic-level output.

5. What is the typical quiescent current of MAX6703TKA+TG71? - The typical quiescent current of MAX6703TKA+TG71 is very low, usually around 1µA, making it suitable for low-power applications.

6. Can MAX6703TKA+TG71 be used for overvoltage protection? - Yes, MAX6703TKA+TG71 can be used for overvoltage protection. By setting the threshold voltage appropriately, it can detect when the input voltage exceeds a certain limit and trigger an output signal to protect downstream components.

7. Can MAX6703TKA+TG71 be used for undervoltage protection? - Yes, MAX6703TKA+TG71 can also be used for undervoltage protection. By setting the threshold voltage appropriately, it can detect when the input voltage falls below a certain limit and trigger an output signal to prevent damage to sensitive components.

8. What is the response time of MAX6703TKA+TG71? - The response time of MAX6703TKA+TG71 is typically very fast, in the range of microseconds. This makes it suitable for applications that require quick detection and response to voltage changes.

9. Is MAX6703TKA+TG71 suitable for automotive applications? - Yes, MAX6703TKA+TG71 is suitable for automotive applications. It has a wide operating temperature range and can withstand the harsh conditions found in automotive environments.

10. Can multiple MAX6703TKA+TG71 devices be used together? - Yes, multiple MAX6703TKA+TG71 devices can be used together in a system. Each device can monitor a different voltage level, allowing for more comprehensive voltage monitoring and protection in complex circuits or systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.