MAX6740XKSYD3+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Reference
• Characteristics: High precision, low dropout voltage, low temperature coefficient
• Package: SOT23-5
• Essence: Provides a stable and accurate voltage reference for various electronic applications
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Output Voltage: 2.5V
• Initial Accuracy: ±0.1%
• Temperature Coefficient: 10ppm/°C
• Dropout Voltage: 200mV
• Supply Voltage Range: 2.7V to 5.5V
• Quiescent Current: 40µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6740XKSYD3+T has a total of 5 pins:

1. VOUT: Output Voltage
2. GND: Ground
3. TRIM: Trimming pin for adjusting the output voltage
4. BYP: Bypass pin for noise reduction
5. VIN: Input Voltage

Functional Features

• High Precision: The MAX6740XKSYD3+T provides an initial accuracy of ±0.1%, ensuring precise voltage references.
• Low Dropout Voltage: With a dropout voltage of only 200mV, this IC can operate efficiently even with low input voltages.
• Low Temperature Coefficient: The temperature coefficient of 10ppm/°C ensures minimal voltage variations over a wide temperature range.
• Trim Capability: The trimming pin allows fine adjustment of the output voltage to meet specific application requirements.
• Bypass Option: The bypass pin enables noise reduction by connecting an external capacitor.

Advantages and Disadvantages

Advantages: - High precision and stability - Low dropout voltage for efficient operation - Wide operating temperature range - Trim capability for customization - Bypass option for noise reduction

Disadvantages: - Limited output voltage options (fixed at 2.5V) - SOT23-5 package may not be suitable for all applications

Working Principles

The MAX6740XKSYD3+T is a precision voltage reference IC that generates a stable and accurate output voltage of 2.5V. It utilizes a bandgap voltage reference circuit to achieve high precision and low temperature coefficient characteristics. The internal trimming capability allows fine adjustment of the output voltage, ensuring precise voltage references for various electronic applications. The bypass pin provides an option to reduce noise by connecting an external capacitor.

Detailed Application Field Plans

The MAX6740XKSYD3+T finds applications in various fields, including:

1. Industrial Automation: Provides stable voltage references for analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and sensor interfaces.
2. Communications: Used in wireless communication systems, base stations, and network equipment for accurate voltage references.
3. Consumer Electronics: Suitable for battery-powered devices, portable audio players, and handheld gaming consoles.
4. Automotive: Used in automotive electronics for voltage references in engine control units (ECUs), infotainment systems, and advanced driver-assistance systems (ADAS).
5. Medical Devices: Provides precise voltage references for medical instruments, patient monitoring systems, and diagnostic equipment.

Detailed and Complete Alternative Models

1. LM4040CIM3-2.5/NOPB: 2.5V Precision Voltage Reference, SOT-23 package
2. LT1461AIS8-2.5#PBF: 2.5V Micropower Precision Voltage Reference, SO-8 package
3. REF5025AIDGKT: 2.5V Precision Voltage Reference, MSOP-8 package
4. ADR4525BRZ: 2.5V High Precision Voltage Reference, SOT-23 package

These alternative models offer similar voltage reference capabilities and can be considered as substitutes for the MAX6740XKSYD3+T in various applications.

Word count: 413 words