MAX6866UK33D6S+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Regulator
• Characteristics: Low Dropout, Ultra-Low Quiescent Current
• Package: SOT-23-6
• Essence: High-performance voltage regulator with low power consumption
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.5V to 5.5V
• Output Voltage: 3.3V
• Maximum Output Current: 250mA
• Dropout Voltage: 120mV at 100mA
• Quiescent Current: 1µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6866UK33D6S+T has a total of six pins arranged as follows:

```

---

| | --| VOUT GND|-- Pin 1: Ground (GND) --| VIN NC |-- Pin 2: No Connection (NC) --| EN VOUT|-- Pin 3: Output Voltage (VOUT) --| FB VIN |-- Pin 4: Input Voltage (VIN) --| NC EN |-- Pin 5: Enable (EN) --| GND FB |-- Pin 6: Feedback (FB) |___________| ```

Functional Features

• Low dropout voltage ensures stable output even when input voltage is close to the desired output voltage.
• Ultra-low quiescent current minimizes power consumption in standby or low-load conditions.
• Enable pin allows for easy on/off control of the regulator.
• Feedback pin provides accurate regulation of the output voltage.

Advantages and Disadvantages

Advantages

• High-performance voltage regulation with low power consumption.
• Wide input voltage range allows for flexibility in various applications.
• Small package size (SOT-23-6) enables space-saving designs.
• Low dropout voltage ensures stable output even with low input voltages.

Disadvantages

• Limited maximum output current of 250mA may not be suitable for high-power applications.
• Operating temperature range of -40°C to +85°C may restrict usage in extreme environments.

Working Principles

The MAX6866UK33D6S+T is a voltage regulator that takes an input voltage within the range of 2.5V to 5.5V and provides a regulated output voltage of 3.3V. It utilizes a low dropout architecture, which means it can maintain a stable output voltage even when the input voltage is close to the desired output voltage.

The regulator operates by comparing the feedback voltage at the FB pin with a reference voltage. The internal circuitry adjusts the output voltage to ensure it matches the desired value. The enable pin (EN) allows for easy on/off control of the regulator, while the ground (GND) and no connection (NC) pins provide necessary connections.

Detailed Application Field Plans

The MAX6866UK33D6S+T is commonly used in various electronic devices and systems where a stable and regulated voltage supply is required. Some potential application fields include:

1. Battery-powered devices: The low quiescent current and wide input voltage range make it suitable for portable electronics, such as smartphones, tablets, and wearables.
2. IoT devices: With its low power consumption and small package size, it can be used in IoT sensors, smart home devices, and other connected devices.
3. Industrial automation: The regulator can be employed in industrial control systems, PLCs, and motor control circuits, providing reliable voltage regulation.
4. Automotive electronics: The wide operating temperature range makes it suitable for automotive applications, such as infotainment systems, lighting control, and engine management.

Detailed and Complete Alternative Models

1. MAX6866UK33D3S+T: Similar to MAX6866UK33D6S+T, but with a different pin configuration (SOT-23-5).
2. MAX6866UK33D2S+T: Another variant with a different package (SOT-23-3) and reduced maximum output current.
3. MAX6866UK25D6S+T: Similar to MAX6866UK33D6S+T, but with a lower output voltage of 2.5V.

These alternative models provide options with varying pin configurations, package sizes, and output voltages to suit different design requirements.

Word count: 536 words