Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX8760ETL+TG51
詳細を表示 DataSheets

MAX8760ETL+TG51

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TQFN-40
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1A
  • Quiescent Current: 30µA
  • Switching Frequency: 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8760ETL+TG51 has a total of 40 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS/TRK: Soft-Start/Tracking Pin
  6. PGND: Power Ground
  7. LX: Switch Node
  8. BST: Boost Capacitor Connection
  9. VOUT: Output Voltage
  10. COMP: Compensation Pin
  11. AGND: Analog Ground
  12. ISET: Current Limit Set Pin
  13. SYNC: Synchronization Pin
  14. CLKOUT: Clock Output Pin
  15. CLKIN: Clock Input Pin
  16. VCC: Supply Voltage

Functional Features

  • High Efficiency: The MAX8760ETL+TG51 offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 30µA, the IC ensures minimal power consumption during standby or low-load conditions.
  • Wide Input Voltage Range: The device can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, providing flexibility for different system requirements.
  • Soft-Start/Tracking Function: The soft-start feature allows for a controlled startup, preventing excessive inrush current. The tracking function ensures accurate voltage tracking during load changes.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption during standby - Wide input voltage range - Adjustable output voltage - Soft-start and tracking functions

Disadvantages: - Limited maximum output current (1A)

Working Principles

The MAX8760ETL+TG51 is a voltage regulator IC that converts the input voltage to a regulated output voltage. It utilizes a high-frequency switching technique to achieve efficient power conversion. The device incorporates a feedback mechanism to maintain the desired output voltage by adjusting the duty cycle of the internal switch. The soft-start function gradually ramps up the output voltage during startup, while the tracking function ensures accurate voltage tracking during load changes.

Detailed Application Field Plans

The MAX8760ETL+TG51 is commonly used in various applications, including:

  1. Portable Electronic Devices: Power management for smartphones, tablets, and portable media players.
  2. IoT Devices: Voltage regulation for sensors, wireless modules, and microcontrollers in IoT applications.
  3. Industrial Equipment: Power supply for industrial automation systems, control panels, and motor drives.
  4. Automotive Electronics: Voltage regulation for automotive infotainment systems, lighting modules, and advanced driver-assistance systems (ADAS).
  5. Consumer Electronics: Power management for gaming consoles, digital cameras, and audio/video equipment.

Detailed and Complete Alternative Models

  1. MAX17600ETM+: Similar voltage regulator IC with higher maximum output current (2A).
  2. MAX15062ETM+: Voltage regulator IC with integrated power switches for higher current applications (up to 3A).
  3. MAX16910ATI+: Automotive-grade voltage regulator IC with enhanced protection features and wider input voltage range.

These alternative models offer different specifications and features, providing options for specific application requirements.

Word count: 511 words

技術ソリューションにおける MAX8760ETL+TG51 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX8760ETL+TG51 in technical solutions:

  1. Q: What is the MAX8760ETL+TG51? A: The MAX8760ETL+TG51 is a power management IC (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of the MAX8760ETL+TG51? A: The key features include multiple voltage regulators, power sequencing, fault protection, and high efficiency.

  3. Q: What technical solutions can benefit from using the MAX8760ETL+TG51? A: The MAX8760ETL+TG51 can be used in applications such as industrial automation, consumer electronics, and automotive systems.

  4. Q: How many voltage regulators does the MAX8760ETL+TG51 have? A: The MAX8760ETL+TG51 has multiple voltage regulators, typically including buck converters and LDOs.

  5. Q: Can the MAX8760ETL+TG51 handle different input voltages? A: Yes, the MAX8760ETL+TG51 is designed to handle a wide range of input voltages, typically from 2.7V to 5.5V.

  6. Q: Does the MAX8760ETL+TG51 support power sequencing? A: Yes, the MAX8760ETL+TG51 provides power sequencing capabilities to ensure proper startup and shutdown of different components.

  7. Q: What kind of fault protection does the MAX8760ETL+TG51 offer? A: The MAX8760ETL+TG51 includes various fault protection features like overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Q: How efficient is the MAX8760ETL+TG51? A: The MAX8760ETL+TG51 offers high efficiency, typically above 90%, which helps to minimize power losses and extend battery life.

  9. Q: Can the MAX8760ETL+TG51 be used in battery-powered applications? A: Yes, the MAX8760ETL+TG51 is suitable for battery-powered applications due to its low quiescent current and power-saving features.

  10. Q: Are evaluation boards or reference designs available for the MAX8760ETL+TG51? A: Yes, Maxim Integrated provides evaluation boards and reference designs to help developers quickly prototype and integrate the MAX8760ETL+TG51 into their solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and application requirements.