Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX8865REUA+
詳細を表示 DataSheets

MAX8865REUA+ - English Editing Encyclopedia Entry

Product Overview

Category

The MAX8865REUA+ belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

The MAX8865REUA+ comes in a small 8-pin µMAX package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The MAX8865REUA+ is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 120mV at 300mA
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. IN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for adjusting output voltage
  4. EN: Enable pin for turning the regulator on/off
  5. NC: No connection pin
  6. VOUT: Regulated output voltage pin
  7. GND: Ground pin
  8. OUT: Output voltage pin

Functional Features

  • High efficiency conversion of input voltage to regulated output voltage
  • Overcurrent protection prevents damage to the circuit
  • Thermal protection shuts down the regulator in case of excessive temperature
  • Adjustable output voltage allows customization for specific applications
  • Low dropout voltage ensures efficient power delivery even with low input voltages

Advantages and Disadvantages

Advantages

  • High efficiency operation
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Disadvantages

  • Limited maximum output current
  • Requires external components for proper operation

Working Principles

The MAX8865REUA+ operates as a linear voltage regulator. It takes an input voltage from the IN pin, regulates it to the desired output voltage using feedback from the FB pin, and provides the regulated voltage at the OUT pin. The regulator maintains a constant output voltage by adjusting its internal circuitry based on the feedback signal.

Detailed Application Field Plans

The MAX8865REUA+ finds applications in various electronic devices and systems, including: 1. Battery-powered devices 2. Portable consumer electronics 3. Industrial control systems 4. Automotive electronics 5. Medical equipment

Detailed and Complete Alternative Models

  1. LM317T: Adjustable voltage regulator with similar characteristics
  2. LT1086: Low dropout voltage regulator with higher maximum output current
  3. TPS7A4700: Ultra-low noise voltage regulator suitable for sensitive applications
  4. ADP3339: High accuracy voltage regulator with low quiescent current

These alternative models offer similar functionality and can be considered as substitutes for the MAX8865REUA+ depending on specific requirements.

In conclusion, the MAX8865REUA+ is a voltage regulator that provides efficient and stable voltage regulation for various electronic applications. Its adjustable output voltage, wide input voltage range, and built-in protection features make it a versatile choice for designers. However, its limited maximum output current and requirement for external components should be taken into consideration during application design.

技術ソリューションにおける MAX8865REUA+ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX8865REUA+ in technical solutions:

  1. Q: What is the MAX8865REUA+? A: The MAX8865REUA+ is a low-dropout linear regulator (LDO) IC that provides a regulated output voltage for various electronic devices.

  2. Q: What is the input voltage range of MAX8865REUA+? A: The input voltage range of MAX8865REUA+ is typically between 2.5V and 6.5V.

  3. Q: What is the output voltage range of MAX8865REUA+? A: The output voltage range of MAX8865REUA+ can be set from 0.8V to 5.5V using external resistors.

  4. Q: What is the maximum output current of MAX8865REUA+? A: The maximum output current of MAX8865REUA+ is 1A.

  5. Q: Is the MAX8865REUA+ suitable for battery-powered applications? A: Yes, the low dropout voltage and low quiescent current make MAX8865REUA+ suitable for battery-powered applications.

  6. Q: Does MAX8865REUA+ have built-in thermal shutdown protection? A: Yes, MAX8865REUA+ has built-in thermal shutdown protection to prevent overheating.

  7. Q: Can I use MAX8865REUA+ in automotive applications? A: Yes, MAX8865REUA+ is designed to meet the requirements of automotive applications.

  8. Q: Does MAX8865REUA+ have short-circuit protection? A: Yes, MAX8865REUA+ has built-in short-circuit protection to prevent damage in case of a short circuit.

  9. Q: Can I use MAX8865REUA+ in low-power IoT devices? A: Yes, the low quiescent current of MAX8865REUA+ makes it suitable for low-power IoT devices.

  10. Q: What is the package type of MAX8865REUA+? A: MAX8865REUA+ is available in a 8-pin µMAX package.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.