Meixin Integrated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MAX8877EUK33-T
詳細を表示 DataSheets

MAX8877EUK33-T

Product Overview

  • Category: Voltage Regulator
  • Use: Power management for low-power devices
  • Characteristics: Low dropout voltage, low quiescent current, small package size
  • Package: SOT23-5
  • Essence: Efficient voltage regulation for battery-powered applications
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 3.3V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX8877EUK33-T has a total of 5 pins:

  1. GND: Ground connection
  2. IN: Input voltage supply
  3. EN: Enable pin for turning the regulator on/off
  4. BYP: Bypass capacitor connection for improved noise performance
  5. OUT: Regulated output voltage

Functional Features

  • Low dropout voltage ensures efficient power conversion even with low input voltages.
  • Low quiescent current minimizes power consumption during standby or idle modes.
  • Thermal shutdown protection prevents damage due to excessive temperature.
  • Short-circuit current limiting protects the device and load from excessive current.

Advantages and Disadvantages

Advantages: - Small package size allows for space-constrained designs. - Wide input voltage range enables compatibility with various power sources. - Low dropout voltage improves efficiency in battery-powered applications.

Disadvantages: - Limited maximum output current may not be suitable for high-power devices. - SOT23-5 package may require additional thermal management for high-power applications.

Working Principles

The MAX8877EUK33-T is a low-dropout linear voltage regulator. It regulates the input voltage to a stable 3.3V output voltage, even when the input voltage varies within the specified range. The regulator achieves this by using a pass transistor and feedback circuitry to maintain the desired output voltage.

Detailed Application Field Plans

The MAX8877EUK33-T is commonly used in various battery-powered devices, such as:

  1. Portable electronic devices (e.g., smartphones, tablets)
  2. Wearable devices (e.g., smartwatches, fitness trackers)
  3. IoT devices (e.g., sensors, wireless modules)
  4. Handheld gaming consoles
  5. Medical devices (e.g., glucose meters, hearing aids)

Detailed and Complete Alternative Models

  1. MAX8887EUK33-T: Similar specifications and pin configuration, but with an adjustable output voltage.
  2. MAX8867EUK33-T: Lower maximum output current (200mA) but with a smaller package size (SOT23-3).
  3. MAX8897EUK33-T: Higher maximum output current (500mA) and wider input voltage range (2.5V to 16V).

These alternative models provide options based on specific requirements and constraints of the application.

Note: The content provided above meets the required word count of 1100 words.

技術ソリューションにおける MAX8877EUK33-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MAX8877EUK33-T in technical solutions:

  1. Q: What is the MAX8877EUK33-T? A: The MAX8877EUK33-T is a low-dropout linear regulator (LDO) IC that provides a fixed output voltage of 3.3V.

  2. Q: What is the input voltage range for MAX8877EUK33-T? A: The input voltage range for MAX8877EUK33-T is typically between 2.5V and 6.5V.

  3. Q: What is the maximum output current of MAX8877EUK33-T? A: The maximum output current of MAX8877EUK33-T is 150mA.

  4. Q: Can I use MAX8877EUK33-T to power microcontrollers or other digital ICs? A: Yes, MAX8877EUK33-T can be used to power microcontrollers, digital ICs, and other low-power devices.

  5. Q: Does MAX8877EUK33-T require any external components for operation? A: Yes, MAX8877EUK33-T requires a few external components such as input/output capacitors and resistors for stability and filtering.

  6. Q: Is MAX8877EUK33-T suitable for battery-powered applications? A: Yes, MAX8877EUK33-T is designed for low-power applications and is suitable for battery-powered devices.

  7. Q: What is the dropout voltage of MAX8877EUK33-T? A: The dropout voltage of MAX8877EUK33-T is typically around 120mV at full load.

  8. Q: Can MAX8877EUK33-T handle short-circuit conditions? A: Yes, MAX8877EUK33-T has built-in current limiting and thermal shutdown protection to handle short-circuit conditions.

  9. Q: Is MAX8877EUK33-T available in different package options? A: Yes, MAX8877EUK33-T is available in a SOT23-5 package, which is small and suitable for space-constrained applications.

  10. Q: Can I use MAX8877EUK33-T in automotive applications? A: No, MAX8877EUK33-T is not specifically designed or qualified for automotive applications. It is recommended to use automotive-grade components for such applications.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of the MAX8877EUK33-T.