画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
24AA044T-I/MUY

24AA044T-I/MUY

Product Overview

Category

The 24AA044T-I/MUY belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is used for non-volatile data storage in various electronic devices such as microcontrollers, sensors, and other digital systems.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • Small form factor

Package

The 24AA044T-I/MUY comes in a small surface-mount package, typically with 8 pins.

Essence

This EEPROM chip provides reliable and long-term data storage for electronic devices.

Packaging/Quantity

It is commonly available in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Memory Size: 4 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. A0 - Chip Address Input
  2. A1 - Chip Address Input
  3. A2 - Chip Address Input
  4. VSS - Ground
  5. SDA - Serial Data
  6. SCL - Serial Clock
  7. WP - Write Protect
  8. VCC - Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • 128-byte Page Write Buffer
  • Hardware Write Protection
  • Sequential Read Operation

Advantages

  • Small form factor
  • Low power consumption
  • High data retention
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 24AA044T-I/MUY operates by using an I2C interface to communicate with the host device. It stores data in a non-volatile manner, allowing for reliable and long-term data retention.

Detailed Application Field Plans

  • Embedded Systems
  • IoT Devices
  • Consumer Electronics
  • Industrial Automation
  • Automotive Electronics

Detailed and Complete Alternative Models

  • 24LC04B-I/SN
  • 24FC1025-I/SN
  • AT24C04C-SSHM-T

In conclusion, the 24AA044T-I/MUY is a versatile EEPROM chip suitable for various electronic applications, offering reliable non-volatile data storage and efficient data retrieval through its I2C interface.

[Word Count: 345]

技術ソリューションにおける 24AA044T-I/MUY の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the maximum clock frequency for 24AA044T-I/MUY?
    Answer: The maximum clock frequency for 24AA044T-I/MUY is 1MHz.

  2. Question: What is the operating voltage range for 24AA044T-I/MUY?
    Answer: The operating voltage range for 24AA044T-I/MUY is 1.7V to 5.5V.

  3. Question: Can 24AA044T-I/MUY be used in automotive applications?
    Answer: Yes, 24AA044T-I/MUY is AEC-Q100 qualified and suitable for automotive applications.

  4. Question: What is the typical standby current for 24AA044T-I/MUY?
    Answer: The typical standby current for 24AA044T-I/MUY is 1µA.

  5. Question: Does 24AA044T-I/MUY support sequential read operation?
    Answer: Yes, 24AA044T-I/MUY supports sequential read operation for faster data access.

  6. Question: What is the write endurance for 24AA044T-I/MUY?
    Answer: The write endurance for 24AA044T-I/MUY is specified as 1,000,000 write cycles.

  7. Question: Is 24AA044T-I/MUY compatible with I2C protocol?
    Answer: Yes, 24AA044T-I/MUY is compatible with the I2C protocol for easy integration into existing designs.

  8. Question: What is the temperature range for 24AA044T-I/MUY?
    Answer: 24AA044T-I/MUY operates over a temperature range of -40°C to +125°C.

  9. Question: Can 24AA044T-I/MUY be used in battery-powered devices?
    Answer: Yes, 24AA044T-I/MUY's low standby current makes it suitable for battery-powered devices.

  10. Question: Does 24AA044T-I/MUY have built-in write protection?
    Answer: Yes, 24AA044T-I/MUY features built-in hardware write protection to prevent accidental writes to the memory array.