24FC64FT-I/MNY

Product Overview

Category

The 24FC64FT-I/MNY belongs to the category of non-volatile memory devices.

Use

It is primarily used for data storage and retrieval in various electronic systems.

Characteristics

• Non-volatile: Retains data even when power is removed.
• High capacity: The 24FC64FT-I/MNY has a storage capacity of 64 kilobits (8 kilobytes).
• I2C interface: It communicates using the I2C protocol, allowing easy integration into existing systems.
• Low power consumption: Designed to minimize power usage, making it suitable for battery-powered devices.

Package

The 24FC64FT-I/MNY is available in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of the 24FC64FT-I/MNY lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The 24FC64FT-I/MNY is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

• Storage Capacity: 64 kilobits (8 kilobytes)
• Interface: I2C
• Operating Voltage: 1.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Write Endurance: 1 million cycles
• Data Retention: 200 years

Detailed Pin Configuration

The 24FC64FT-I/MNY has a standard 8-pin configuration:

1. VCC: Power supply voltage
2. SDA: Serial data input/output
3. SCL: Serial clock input
4. WP: Write protect pin
5. A0: Address bit 0
6. A1: Address bit 1
7. A2: Address bit 2
8. GND: Ground

Functional Features

• Random access: Allows for efficient reading and writing of data at any location within the memory.
• Hardware write protection: The WP pin can be used to protect the memory from accidental writes.
• Page write mode: Enables faster data writes by allowing multiple bytes to be written in a single operation.
• Software write protection: The device supports software-based write protection, providing additional security.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data integrity even during power loss.
• High storage capacity for its compact size.
• Low power consumption extends battery life in portable devices.
• I2C interface simplifies integration into existing systems.

Disadvantages

• Limited storage capacity compared to other non-volatile memory options.
• Slower write speeds compared to some other memory technologies.

Working Principles

The 24FC64FT-I/MNY utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data using a grid of floating-gate transistors that can be electrically programmed and erased. When data is written, charges are trapped in the floating gates, representing the stored information. These charges can be read back later, even when power is removed.

Detailed Application Field Plans

The 24FC64FT-I/MNY finds applications in various electronic systems, including but not limited to: - Consumer electronics - Industrial automation - Automotive electronics - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models to the 24FC64FT-I/MNY include: - 24LC64: Similar specifications, but with a different package and pin configuration. - 25AA640A: Offers similar functionality with a different interface (SPI).

These alternative models provide similar capabilities and can be considered based on specific project requirements.

Word count: 478 words