画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
24LC08BH-I/ST

24LC08BH-I/ST

Product Overview

Category

The 24LC08BH-I/ST belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The 24LC08BH-I/ST can be erased and reprogrammed electronically, making it convenient for updating stored data.
  • Non-volatile: The chip retains its stored data even when power is removed.
  • High storage capacity: This model has a storage capacity of 8 kilobits (1 kilobyte).
  • Low power consumption: The chip operates at low power levels, making it suitable for battery-powered devices.
  • I2C interface: It utilizes the Inter-Integrated Circuit (I2C) protocol for communication with other devices.

Package

The 24LC08BH-I/ST is available in a small surface-mount package, known as the 8-lead SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the 24LC08BH-I/ST lies in its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

This chip is typically sold in reels or tubes, with each reel containing 2500 units.

Specifications

  • Storage Capacity: 8 kilobits (1024 bytes)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1 million cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 24LC08BH-I/ST features an 8-pin configuration:

  1. VCC: Power supply voltage
  2. SDA: Serial data input/output pin for I2C communication
  3. SCL: Serial clock input pin for I2C communication
  4. WP: Write protect pin (optional)
  5. A0: Address bit 0
  6. A1: Address bit 1
  7. A2: Address bit 2
  8. GND: Ground

Functional Features

  • Random access: The chip allows for random access to any memory location, enabling efficient data retrieval.
  • Byte-level read/write: Data can be read from or written to the chip at the byte level, providing flexibility in data manipulation.
  • Hardware write protection: The optional write protect pin (WP) can be used to prevent accidental modification of stored data.
  • Start/Stop conditions: The chip supports standard I2C start and stop conditions for reliable communication.

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices.
  • High storage capacity enables storing a significant amount of data.
  • Electrically erasable feature allows for easy updates and modifications.
  • Long data retention period ensures data integrity over extended periods.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to some other memory types.
  • Requires an external microcontroller or device for communication and control.

Working Principles

The 24LC08BH-I/ST utilizes EEPROM technology, which employs floating-gate transistors to store data. When writing data, an electrical charge is applied to the floating gate, altering its threshold voltage and allowing the transistor to represent either a "0" or a "1". To erase data, a higher voltage is applied to remove the charge from the floating gate, resetting the transistor's state.

Detailed Application Field Plans

The 24LC08BH-I/ST finds applications in various fields, including:

  1. Embedded Systems: Used for storing configuration data, firmware updates, and user settings in microcontroller-based systems.
  2. Automotive Electronics: Employed for storing critical data, such as vehicle identification numbers (VINs) and calibration parameters.
  3. Industrial Automation: Utilized for storing production data, sensor calibration values, and system configurations.
  4. Consumer Electronics: Found in devices like smart TVs, set-top boxes, and gaming consoles for storing user preferences and application data.

Detailed and Complete Alternative Models

  • 24LC16B-I/SN: 16 kilobit EEPROM chip with similar characteristics and package.
  • 24LC32A-I/P: 32 kilobit EEPROM chip with extended temperature range and DIP (Dual Inline Package) package.
  • 24LC64-I/SM: 64 kilobit EEPROM chip with I2C-compatible interface and surface-mount package.

These alternative models offer varying storage capacities and package options to suit different application requirements.

Word count: 610 words

技術ソリューションにおける 24LC08BH-I/ST の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum clock frequency for 24LC08BH-I/ST?
    - The maximum clock frequency for 24LC08BH-I/ST is 400 kHz.

  2. What is the operating voltage range for 24LC08BH-I/ST?
    - The operating voltage range for 24LC08BH-I/ST is 1.7V to 5.5V.

  3. Can 24LC08BH-I/ST be used in automotive applications?
    - Yes, 24LC08BH-I/ST is AEC-Q100 qualified and suitable for automotive applications.

  4. What is the typical write cycle time for 24LC08BH-I/ST?
    - The typical write cycle time for 24LC08BH-I/ST is 5 ms.

  5. Does 24LC08BH-I/ST support sequential read operation?
    - Yes, 24LC08BH-I/ST supports sequential read operation.

  6. What is the maximum ambient temperature for 24LC08BH-I/ST?
    - The maximum ambient temperature for 24LC08BH-I/ST is 125°C.

  7. Can 24LC08BH-I/ST be used in industrial control systems?
    - Yes, 24LC08BH-I/ST is suitable for use in industrial control systems.

  8. What is the page write buffer size for 24LC08BH-I/ST?
    - The page write buffer size for 24LC08BH-I/ST is 16 bytes.

  9. Is 24LC08BH-I/ST compatible with I2C interface?
    - Yes, 24LC08BH-I/ST is compatible with I2C interface.

  10. What is the typical standby current for 24LC08BH-I/ST?
    - The typical standby current for 24LC08BH-I/ST is 1 µA.