24LC1025-I/P
Product Overview
Category
The 24LC1025-I/P belongs to the category of electrically erasable programmable read-only memory (EEPROM) integrated circuits.
Use
It is used for non-volatile data storage in various electronic devices, such as microcontrollers, sensors, and communication modules.
Characteristics
- Non-volatile memory
- I2C interface
- Low power consumption
- Small form factor
Package
The 24LC1025-I/P is available in a DIP-8 package.
Essence
This product provides reliable and flexible non-volatile memory storage for electronic systems.
Packaging/Quantity
The 24LC1025-I/P is typically packaged in tubes or trays and is available in varying quantities based on customer requirements.
Specifications
- Memory Size: 128 Kbit
- Interface: I2C
- Operating Voltage: 1.7V to 5.5V
- Operating Temperature: -40°C to 85°C
- Write Cycle Endurance: 1,000,000 cycles
- Data Retention: 200 years
Detailed Pin Configuration
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | A0 | Chip Address Input | | 2 | A1 | Chip Address Input | | 3 | A2 | Chip Address Input | | 4 | VSS | Ground | | 5 | SDA | Serial Data Input/Output | | 6 | SCL | Serial Clock Input | | 7 | WP | Write Protect | | 8 | VCC | Power Supply |
Functional Features
- Byte and Page Write
- Random and Sequential Read
- Self-timed Write Cycle
- Software Write Protection
Advantages
- Low power consumption
- Compact form factor
- High reliability and endurance
- Easy interfacing with microcontrollers
Disadvantages
- Limited storage capacity compared to other memory technologies
- Slower write speeds compared to volatile memory
Working Principles
The 24LC1025-I/P utilizes EEPROM technology, allowing data to be written and read electronically. It communicates with the host system through the I2C interface, enabling seamless integration into various electronic designs.
Detailed Application Field Plans
The 24LC1025-I/P is commonly used in applications such as: - Data logging systems - Sensor calibration and configuration - Firmware storage in embedded systems - Parameter storage in industrial control systems
Detailed and Complete Alternative Models
- 24LC1026-I/P: Higher capacity variant
- 24AA025E48T-I/OT: I2C-compatible EEPROM with smaller form factor
- AT24C256C-SSHL-T: Larger capacity EEPROM with extended temperature range
In conclusion, the 24LC1025-I/P offers a reliable and efficient solution for non-volatile memory storage in a wide range of electronic applications, making it an essential component in modern electronic design.
[Word Count: 473]
技術ソリューションにおける 24LC1025-I/P の適用に関連する 10 件の一般的な質問と回答をリストします。
Question: What is the maximum clock frequency for 24LC1025-I/P?
Answer: The maximum clock frequency for 24LC1025-I/P is 400 kHz.Question: What is the operating voltage range for 24LC1025-I/P?
Answer: The operating voltage range for 24LC1025-I/P is 1.7V to 5.5V.Question: Can 24LC1025-I/P be used in automotive applications?
Answer: Yes, 24LC1025-I/P is suitable for automotive applications.Question: What is the storage temperature range for 24LC1025-I/P?
Answer: The storage temperature range for 24LC1025-I/P is -65°C to +150°C.Question: Does 24LC1025-I/P support sequential read operation?
Answer: Yes, 24LC1025-I/P supports sequential read operation.Question: What is the typical write cycle time for 24LC1025-I/P?
Answer: The typical write cycle time for 24LC1025-I/P is 5 ms.Question: Can 24LC1025-I/P operate as a standalone memory or does it require a microcontroller?
Answer: 24LC1025-I/P can operate as a standalone memory without requiring a microcontroller.Question: Is 24LC1025-I/P compatible with I2C interface?
Answer: Yes, 24LC1025-I/P is compatible with I2C interface.Question: What is the maximum number of write cycles supported by 24LC1025-I/P?
Answer: 24LC1025-I/P supports a minimum of 1,000,000 write cycles.Question: Can 24LC1025-I/P be used in low-power applications?
Answer: Yes, 24LC1025-I/P is suitable for low-power applications.