画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
24LC64T-E/SN

24LC64T-E/SN

Product Overview

Category

The 24LC64T-E/SN belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Electrically erasable: The 24LC64T-E/SN can be erased and reprogrammed electronically, making it convenient for updating stored data.
  • Non-volatile: The chip retains its stored data even when power is removed.
  • High storage capacity: This model has a storage capacity of 64 kilobits (8 kilobytes).
  • Low power consumption: The chip operates at low power levels, making it suitable for battery-powered devices.
  • I2C interface: It utilizes the Inter-Integrated Circuit (I2C) protocol for communication with other devices.

Package

The 24LC64T-E/SN is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the 24LC64T-E/SN lies in its ability to provide reliable and non-volatile data storage in a compact form factor.

Packaging/Quantity

This chip is typically sold in reels or tubes, with each reel containing 2500 units.

Specifications

  • Storage Capacity: 64 kilobits (8 kilobytes)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 24LC64T-E/SN features the following pin configuration:

  1. VCC - Power supply voltage
  2. SDA - Serial data input/output
  3. SCL - Serial clock input
  4. WP - Write protect input
  5. VSS - Ground
  6. NC - No connection
  7. NC - No connection
  8. NC - No connection

Functional Features

  • Random access: The chip allows for random access to any memory location, enabling efficient data retrieval.
  • Byte-level read and write operations: Data can be read from or written to the chip at the byte level, providing flexibility in data manipulation.
  • Hardware write protection: The WP pin can be used to protect the stored data from accidental modification.
  • Acknowledge support: The chip supports acknowledge signals during data transfer, ensuring reliable communication.

Advantages and Disadvantages

Advantages

  • High storage capacity for its form factor
  • Low power consumption
  • Reliable and non-volatile data storage
  • Compact package size
  • Support for I2C interface

Disadvantages

  • Limited storage capacity compared to other EEPROM models
  • Relatively higher cost per kilobit of storage

Working Principles

The 24LC64T-E/SN utilizes a combination of electrically erasable and programmable memory cells to store data. When data needs to be written, the chip applies an electrical charge to specific memory cells, altering their state. To erase data, the chip removes the electrical charge from the corresponding memory cells. This process allows for repeated read, write, and erase operations without requiring physical modifications to the chip.

Detailed Application Field Plans

The 24LC64T-E/SN finds applications in various fields, including:

  1. Embedded systems: Used for storing configuration data, firmware updates, and user settings in microcontrollers and single-board computers.
  2. Automotive electronics: Employed for storing critical data, such as vehicle identification numbers (VINs), mileage records, and calibration data.
  3. Industrial automation: Utilized for storing calibration parameters, sensor data, and configuration settings in programmable logic controllers (PLCs) and industrial control systems.
  4. Consumer electronics: Integrated into devices like smart TVs, set-top boxes, and gaming consoles to store user preferences, channel lists, and firmware updates.

Detailed and Complete Alternative Models

  • 24LC32A: A lower-capacity alternative with 32 kilobits of storage.
  • 24LC128: A higher-capacity alternative with 128 kilobits of storage.
  • 24LC256: A higher-capacity alternative with 256 kilobits of storage.

These alternative models offer different storage capacities to suit specific application requirements.

In conclusion, the 24LC64T-E/SN is an electrically erasable programmable read-only memory chip that provides reliable and non-volatile data storage. With its high storage capacity, low power consumption, and compact form factor, it finds applications in various fields, including embedded systems, automotive electronics, industrial automation, and consumer electronics.

技術ソリューションにおける 24LC64T-E/SN の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the maximum clock frequency for 24LC64T-E/SN?
    Answer: The maximum clock frequency for 24LC64T-E/SN is 400 kHz.

  2. Question: What is the operating voltage range for 24LC64T-E/SN?
    Answer: The operating voltage range for 24LC64T-E/SN is 1.7V to 5.5V.

  3. Question: Can 24LC64T-E/SN be used in automotive applications?
    Answer: Yes, 24LC64T-E/SN is AEC-Q100 qualified and suitable for automotive applications.

  4. Question: What is the storage temperature range for 24LC64T-E/SN?
    Answer: The storage temperature range for 24LC64T-E/SN is -65°C to 150°C.

  5. Question: Does 24LC64T-E/SN support sequential read operation?
    Answer: Yes, 24LC64T-E/SN supports sequential read operation.

  6. Question: What is the page write time for 24LC64T-E/SN?
    Answer: The page write time for 24LC64T-E/SN is 5 ms.

  7. Question: Is 24LC64T-E/SN compatible with I2C protocol?
    Answer: Yes, 24LC64T-E/SN is compatible with I2C protocol.

  8. Question: What is the endurance of 24LC64T-E/SN?
    Answer: The endurance of 24LC64T-E/SN is 1,000,000 write cycles.

  9. Question: Can 24LC64T-E/SN operate at high altitudes?
    Answer: Yes, 24LC64T-E/SN can operate at altitudes up to 10,000 feet.

  10. Question: Does 24LC64T-E/SN have built-in write protection?
    Answer: Yes, 24LC64T-E/SN has built-in hardware write protection.