画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
25LC160AT-I/SN

25LC160AT-I/SN

Product Overview

Category: Integrated Circuit (IC)

Use: Non-volatile Serial EEPROM Memory

Characteristics: - Low-power CMOS technology - 16Kbits of memory organized as 2048 x 8 bits - SPI interface for communication - 1.8V to 5.5V operating voltage range - 1 MHz clock rate - 100,000 erase/write cycles endurance - Data retention of over 200 years - Small form factor package

Package: SOIC (Small Outline Integrated Circuit)

Essence: The 25LC160AT-I/SN is a non-volatile serial EEPROM memory IC that provides reliable and low-power data storage in various electronic devices.

Packaging/Quantity: The 25LC160AT-I/SN is available in tape and reel packaging with 2,500 units per reel.

Specifications

  • Memory Size: 16 Kbits
  • Organization: 2048 x 8 bits
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage Range: 1.8V to 5.5V
  • Clock Rate: Up to 1 MHz
  • Endurance: 100,000 erase/write cycles
  • Data Retention: Over 200 years
  • Package Type: SOIC-8

Detailed Pin Configuration

The 25LC160AT-I/SN has an 8-pin SOIC package with the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input/Output (SI/O)
  4. Ground (GND)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. VCC (Power Supply)
  8. Not Connected (NC)

Functional Features

  • Non-volatile memory: The 25LC160AT-I/SN retains data even when power is removed.
  • Serial communication: It uses the SPI interface for easy integration with microcontrollers and other devices.
  • Low-power operation: The IC operates at low power, making it suitable for battery-powered applications.
  • High endurance: With 100,000 erase/write cycles, it ensures reliable and long-lasting data storage.
  • Wide voltage range: The operating voltage range of 1.8V to 5.5V allows compatibility with various systems.

Advantages and Disadvantages

Advantages: - Non-volatile memory ensures data retention even during power loss. - Small form factor package enables space-saving designs. - SPI interface provides easy integration with microcontrollers. - Low-power operation extends battery life in portable devices. - High endurance guarantees reliable data storage.

Disadvantages: - Limited memory size may not be sufficient for certain applications. - Slower clock rate compared to some other EEPROMs. - Lack of additional security features like hardware encryption.

Working Principles

The 25LC160AT-I/SN utilizes a floating-gate transistor structure to store data. When data needs to be written, the IC applies a high voltage to the gate, allowing electrons to tunnel through an insulating layer onto the floating gate. This process traps the charge, representing a logical "1" or "0". Reading the data involves sensing the charge on the floating gate.

Detailed Application Field Plans

The 25LC160AT-I/SN can be used in various applications, including but not limited to: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - Smart meters - IoT (Internet of Things) devices

In consumer electronics, it can be used for storing configuration settings, firmware updates, and user data. In industrial automation, it can store calibration data, device parameters, and event logs. Automotive systems can utilize it for storing vehicle settings, error codes, and sensor data. Medical devices can benefit from its non-volatile memory for storing patient information and device configurations. Smart meters can use it to store energy consumption data, while IoT devices can store sensor readings and network configuration.

Detailed and Complete Alternative Models

  • 25LC080AT-I/SN: 8 Kbit Serial EEPROM with similar features but lower memory capacity.
  • 25LC320AT-I/SN: 32 Kbit Serial EEPROM with similar features but higher memory capacity.
  • 25AA160A-I/MS: 16 Kbit Serial EEPROM with I2C interface instead of SPI.
  • 24LC256-I/P: 256 Kbit Serial EEPROM with similar features but larger memory capacity.

These alternative models provide options based on different memory capacities, interfaces, and package types, allowing designers to choose the most suitable option for their specific requirements.

Note: The above content is a sample structure for an encyclopedia entry and may not contain actual specifications or details of the mentioned product.

技術ソリューションにおける 25LC160AT-I/SN の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the maximum clock frequency for 25LC160AT-I/SN?
    Answer: The maximum clock frequency for 25LC160AT-I/SN is 10 MHz.

  2. Question: What is the operating voltage range for 25LC160AT-I/SN?
    Answer: The operating voltage range for 25LC160AT-I/SN is 2.5V to 5.5V.

  3. Question: Can 25LC160AT-I/SN be used in automotive applications?
    Answer: Yes, 25LC160AT-I/SN is suitable for automotive applications.

  4. Question: What is the typical standby current for 25LC160AT-I/SN?
    Answer: The typical standby current for 25LC160AT-I/SN is 1 µA.

  5. Question: Does 25LC160AT-I/SN support SPI communication?
    Answer: Yes, 25LC160AT-I/SN supports SPI communication.

  6. Question: What is the temperature range for 25LC160AT-I/SN?
    Answer: The temperature range for 25LC160AT-I/SN is -40°C to +85°C.

  7. Question: Can 25LC160AT-I/SN be used in industrial control systems?
    Answer: Yes, 25LC160AT-I/SN is suitable for use in industrial control systems.

  8. Question: What is the write endurance for 25LC160AT-I/SN?
    Answer: The write endurance for 25LC160AT-I/SN is 1,000,000 erase/write cycles.

  9. Question: Is 25LC160AT-I/SN RoHS compliant?
    Answer: Yes, 25LC160AT-I/SN is RoHS compliant.

  10. Question: What package options are available for 25LC160AT-I/SN?
    Answer: 25LC160AT-I/SN is available in SOIC and TSSOP package options.