画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
25LC320T/SN

25LC320T/SN

Product Overview

Category

The 25LC320T/SN belongs to the category of serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices, including consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • Serial interface
  • Low power consumption
  • High reliability
  • Small form factor

Package

The 25LC320T/SN is available in a small surface-mount package, typically with 8 pins.

Essence

The essence of the 25LC320T/SN lies in its ability to store and retrieve data reliably in a wide range of operating conditions.

Packaging/Quantity

It is usually supplied in tape and reel packaging, with quantities varying based on the manufacturer's specifications.

Specifications

  • Memory Size: 32 Kbits
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.5V - 5.5V
  • Operating Temperature: -40°C to +85°C
  • Write Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 25LC320T/SN typically has the following pin configuration: 1. Chip Select (/CS) 2. Serial Clock (SCK) 3. Serial Data Input/Output (SI/O) 4. Serial Data Output/Input (SO/I) 5. VSS (Ground) 6. Write Protect (/WP) 7. Hold (/HOLD) 8. VDD (Power)

Functional Features

  • Byte and Page Write Modes
  • Sequential Reads
  • Self-timed Write Cycle
  • Deep Power-down Mode
  • Hardware Write Protection

Advantages

  • Compact size
  • Low power consumption
  • High-speed data transfer
  • Wide operating voltage range
  • Robust write endurance and data retention

Disadvantages

  • Limited storage capacity compared to larger EEPROMs
  • Higher cost per bit compared to traditional non-volatile memories

Working Principles

The 25LC320T/SN operates by using the SPI protocol to communicate with the host microcontroller or system. It stores data in a non-volatile manner, allowing for reliable data retention even when power is removed.

Detailed Application Field Plans

The 25LC320T/SN finds applications in various fields, including: - Automotive: storing vehicle configuration data - Consumer Electronics: storing user settings and preferences - Industrial Control Systems: storing calibration data and event logs

Detailed and Complete Alternative Models

Some alternative models to the 25LC320T/SN include: - 24LC32A: Similar capacity EEPROM with I2C interface - AT25DF321: Higher capacity flash memory with SPI interface - M24M02: Larger capacity EEPROM with I2C interface

This comprehensive entry provides an in-depth understanding of the 25LC320T/SN, covering its basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける 25LC320T/SN の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the maximum clock frequency for 25LC320T/SN?
    Answer: The maximum clock frequency for 25LC320T/SN is 10 MHz.

  2. Question: What is the operating voltage range for 25LC320T/SN?
    Answer: The operating voltage range for 25LC320T/SN is 2.5V to 5.5V.

  3. Question: Can 25LC320T/SN be used in automotive applications?
    Answer: Yes, 25LC320T/SN is suitable for automotive applications.

  4. Question: What is the typical standby current for 25LC320T/SN?
    Answer: The typical standby current for 25LC320T/SN is 1 µA.

  5. Question: Does 25LC320T/SN support SPI communication?
    Answer: Yes, 25LC320T/SN supports SPI communication.

  6. Question: What is the temperature range for 25LC320T/SN?
    Answer: The temperature range for 25LC320T/SN is -40°C to +85°C.

  7. Question: Is 25LC320T/SN RoHS compliant?
    Answer: Yes, 25LC320T/SN is RoHS compliant.

  8. Question: What is the memory capacity of 25LC320T/SN?
    Answer: 25LC320T/SN has a memory capacity of 32 Kbits (4 Kbytes).

  9. Question: Can 25LC320T/SN be used in industrial control systems?
    Answer: Yes, 25LC320T/SN is suitable for use in industrial control systems.

  10. Question: Does 25LC320T/SN have write protection features?
    Answer: Yes, 25LC320T/SN includes hardware and software write protection features.