画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
93C86CT-I/MNY

93C86CT-I/MNY

Product Overview

Category

The 93C86CT-I/MNY belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices such as automotive, industrial, and consumer electronics.

Characteristics

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package

The 93C86CT-I/MNY is typically available in a small surface-mount package.

Essence

This chip provides a reliable and efficient solution for storing critical data in electronic systems.

Packaging/Quantity

It is usually supplied in reels or tubes with varying quantities depending on the manufacturer's specifications.

Specifications

  • Memory Size: 16 Kbits
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.5V - 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Data Retention: 100 years
  • Endurance: 1,000,000 write cycles

Detailed Pin Configuration

The 93C86CT-I/MNY typically has 8 pins, including power supply, ground, and serial communication interface pins.

Functional Features

  • Serial data input/output
  • Write protection
  • Sequential read operation
  • Self-timed programming cycle

Advantages

  • Compact size
  • Low power consumption
  • High data retention
  • Compatibility with various electronic systems

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93C86CT-I/MNY utilizes EEPROM technology, allowing it to store and retrieve data even when the power is turned off. It operates using a serial communication interface, enabling efficient data transfer between the chip and the host system.

Detailed Application Field Plans

The 93C86CT-I/MNY is widely used in applications such as: - Automotive engine control units - Industrial automation systems - Consumer electronics for firmware storage

Detailed and Complete Alternative Models

Some alternative models to the 93C86CT-I/MNY include: - 24C02C - AT24C16 - CAT24C256

In conclusion, the 93C86CT-I/MNY is a versatile EEPROM chip that offers reliable non-volatile data storage for a wide range of electronic applications.

[Word count: 347]

技術ソリューションにおける 93C86CT-I/MNY の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the operating voltage range of 93C86CT-I/MNY?
    - The operating voltage range of 93C86CT-I/MNY is 2.5V to 5.5V.

  2. What is the maximum clock frequency supported by 93C86CT-I/MNY?
    - The maximum clock frequency supported by 93C86CT-I/MNY is 3MHz.

  3. Can 93C86CT-I/MNY be used in automotive applications?
    - Yes, 93C86CT-I/MNY is suitable for automotive applications.

  4. What is the typical write cycle time for 93C86CT-I/MNY?
    - The typical write cycle time for 93C86CT-I/MNY is 10ms.

  5. Does 93C86CT-I/MNY support SPI communication?
    - Yes, 93C86CT-I/MNY supports SPI communication.

  6. What is the temperature range for 93C86CT-I/MNY?
    - The temperature range for 93C86CT-I/MNY is -40°C to 125°C.

  7. Is 93C86CT-I/MNY compatible with RoHS requirements?
    - Yes, 93C86CT-I/MNY is compliant with RoHS requirements.

  8. Can 93C86CT-I/MNY be used in industrial control systems?
    - Yes, 93C86CT-I/MNY is suitable for use in industrial control systems.

  9. What is the package type for 93C86CT-I/MNY?
    - 93C86CT-I/MNY is available in an 8-pin SOIC package.

  10. Does 93C86CT-I/MNY have built-in security features?
    - Yes, 93C86CT-I/MNY includes built-in security features such as software protection and write protection.