画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
93C86CT-I/ST

93C86CT-I/ST

Product Overview

Category

The 93C86CT-I/ST belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices, including automotive, industrial, and consumer applications.

Characteristics

  • Non-volatile memory
  • Low power consumption
  • Small form factor
  • High reliability

Package

The 93C86CT-I/ST is typically available in a surface-mount package.

Essence

This EEPROM chip is essential for storing critical data in electronic systems, ensuring that the information is retained even when the power is turned off.

Packaging/Quantity

The chip is usually supplied in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Memory Capacity: 16 Kbits
  • Interface: Serial
  • Operating Voltage: 2.5V - 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Data Retention: 100 years
  • Endurance: 1,000,000 write cycles

Detailed Pin Configuration

The 93C86CT-I/ST typically features an 8-pin configuration, including power supply, data input/output, and control pins.

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Enhanced ESD Protection
  • Sequential Read Operation

Advantages

  • Reliable data retention
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Disadvantages

  • Limited capacity compared to other storage solutions
  • Slower write speeds compared to volatile memory

Working Principles

The 93C86CT-I/ST utilizes a floating gate transistor structure to store data by trapping electrons. When a voltage is applied, the electrons are either removed or added, altering the state of the memory cell.

Detailed Application Field Plans

  • Automotive: Used for storing vehicle configuration data and error codes.
  • Industrial: Employed in programmable logic controllers and sensor modules for data logging.
  • Consumer Electronics: Integrated into smart appliances and IoT devices for configuration and calibration data storage.

Detailed and Complete Alternative Models

  • AT24C16C
  • CAT24C16
  • M24C16
  • 24AA16

In conclusion, the 93C86CT-I/ST is a versatile EEPROM chip suitable for a wide range of applications, offering reliable non-volatile data storage in a compact form factor.

Word Count: 410

技術ソリューションにおける 93C86CT-I/ST の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the operating voltage range of 93C86CT-I/ST?
    - The operating voltage range of 93C86CT-I/ST is 2.5V to 5.5V.

  2. What is the maximum clock frequency supported by 93C86CT-I/ST?
    - The maximum clock frequency supported by 93C86CT-I/ST is 3MHz.

  3. Can 93C86CT-I/ST be used in automotive applications?
    - Yes, 93C86CT-I/ST is suitable for automotive applications.

  4. What is the temperature range for 93C86CT-I/ST?
    - The temperature range for 93C86CT-I/ST is -40°C to 125°C.

  5. Does 93C86CT-I/ST support SPI communication?
    - Yes, 93C86CT-I/ST supports SPI communication.

  6. What is the typical write cycle time for 93C86CT-I/ST?
    - The typical write cycle time for 93C86CT-I/ST is 10ms.

  7. Is 93C86CT-I/ST compatible with RoHS requirements?
    - Yes, 93C86CT-I/ST is compliant with RoHS requirements.

  8. Can 93C86CT-I/ST be used in industrial control systems?
    - Yes, 93C86CT-I/ST is suitable for use in industrial control systems.

  9. What is the package type of 93C86CT-I/ST?
    - 93C86CT-I/ST is available in an 8-lead SOIC package.

  10. Does 93C86CT-I/ST have built-in security features?
    - Yes, 93C86CT-I/ST includes built-in security features for data protection.