画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
93LC76B-I/P

93LC76B-I/P

Product Overview

Category

The 93LC76B-I/P belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers and embedded systems.

Characteristics

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package

The 93LC76B-I/P is available in a DIP-8 package.

Essence

This EEPROM chip provides a reliable and efficient solution for storing critical data in electronic systems.

Packaging/Quantity

It is typically packaged in tubes or trays and is available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Memory Capacity: 8 Kbits
  • Interface: Serial
  • Operating Voltage: 2.5V - 5.5V
  • Maximum Clock Frequency: 2 MHz
  • Data Retention: 200 years
  • Endurance: 1,000,000 write cycles

Detailed Pin Configuration

  1. VSS - Ground
  2. VDD - Power Supply
  3. CS - Chip Select
  4. DI - Serial Data Input
  5. DO - Serial Data Output
  6. CLK - Clock Input
  7. NC - No Connection
  8. NC - No Connection

Functional Features

  • Byte and Page Write Modes
  • Self-timed Erase and Write Cycles
  • Enhanced ESD/Latch-Up Protection
  • Sequential Read Operation

Advantages

  • Low power consumption
  • High reliability and endurance
  • Compact form factor
  • Easy integration with microcontrollers

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93LC76B-I/P utilizes a floating gate transistor structure to store data. When data is written, an electrical charge is applied to the floating gate, altering its conductivity and thereby storing the information. This data can be erased and reprogrammed electrically, making it non-volatile.

Detailed Application Field Plans

The 93LC76B-I/P is widely used in applications requiring non-volatile memory, such as: - Industrial control systems - Automotive electronics - Consumer electronics - Medical devices - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to the 93LC76B-I/P include: - 24LC08B - 25AA080 - AT24C08A - CAT24C08

In conclusion, the 93LC76B-I/P offers a reliable and efficient solution for non-volatile data storage in various electronic applications, despite its limitations in storage capacity and write speed. Its compact form factor and low power consumption make it a popular choice for designers seeking dependable memory solutions.

[Word Count: 411]

技術ソリューションにおける 93LC76B-I/P の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum clock frequency for 93LC76B-I/P?
    - The maximum clock frequency for 93LC76B-I/P is 2 MHz.

  2. What is the operating voltage range for 93LC76B-I/P?
    - The operating voltage range for 93LC76B-I/P is 2.5V to 5.5V.

  3. Can 93LC76B-I/P be used in automotive applications?
    - Yes, 93LC76B-I/P is suitable for automotive applications.

  4. What is the typical write cycle time for 93LC76B-I/P?
    - The typical write cycle time for 93LC76B-I/P is 5 ms.

  5. Is 93LC76B-I/P compatible with SPI interface?
    - Yes, 93LC76B-I/P is compatible with SPI interface.

  6. What is the temperature range for 93LC76B-I/P?
    - The temperature range for 93LC76B-I/P is -40°C to 125°C.

  7. Can 93LC76B-I/P be used in battery-powered devices?
    - Yes, 93LC76B-I/P can be used in battery-powered devices due to its low power consumption.

  8. What is the maximum data retention period for 93LC76B-I/P?
    - The maximum data retention period for 93LC76B-I/P is 200 years.

  9. Does 93LC76B-I/P support partial page writes?
    - Yes, 93LC76B-I/P supports partial page writes.

  10. What is the package type for 93LC76B-I/P?
    - 93LC76B-I/P is available in a DIP-8 package.