AT24C01A-10TI-1.8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile memory storage
• Characteristics: Low-power, high-reliability, small form factor
• Package: 8-pin SOIC (Small Outline Integrated Circuit)
• Essence: EEPROM (Electrically Erasable Programmable Read-Only Memory)
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Capacity: 1 Kilobit (128 bytes)
• Operating Voltage: 1.7V to 5.5V
• Speed: 400 kHz (I2C-compatible)
• Endurance: 1 million write cycles
• Data Retention: 100 years
• Write Protect Pin: Yes
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

1. A0: Device Address Input
2. A1: Device Address Input
3. A2: Device Address Input
4. GND: Ground
5. SDA: Serial Data Input/Output
6. SCL: Serial Clock Input
7. WP: Write Protect Input
8. VCC: Power Supply

Functional Features

• I2C-Compatible Interface: Allows for easy integration with microcontrollers and other devices.
• Byte-Writable: Enables individual byte-level read and write operations.
• Software Write Protection: The WP pin can be used to protect the memory from accidental writes.
• Self-Timed Programming Cycle: Simplifies programming and reduces the need for external timing components.
• Low Power Consumption: Ideal for battery-powered applications.

Advantages

• Small Form Factor: The 8-pin SOIC package allows for space-efficient designs.
• High Reliability: EEPROM technology ensures data integrity even in harsh environments.
• Wide Operating Voltage Range: Can be used with a variety of power supply voltages.
• Long Data Retention: Data can be stored for up to 100 years without the need for power.

Disadvantages

• Limited Capacity: The 1 Kilobit capacity may not be sufficient for certain applications.
• Relatively Slow Speed: The maximum operating speed of 400 kHz may not meet the requirements of high-speed data transfer.

Working Principles

AT24C01A-10TI-1.8 is an EEPROM that uses electrically controlled floating gate transistors to store and retrieve data. It utilizes the I2C protocol for communication with external devices. The memory cells are organized into 16 pages, each consisting of 8 bytes. Data can be written or read at the byte level, allowing for flexible data manipulation.

Detailed Application Field Plans

• Consumer Electronics: Used for storing configuration settings, user preferences, and other non-volatile data in devices such as TVs, set-top boxes, and audio systems.
• Industrial Automation: Suitable for storing calibration data, equipment parameters, and event logs in industrial control systems.
• Automotive: Used for storing vehicle-specific data, such as mileage, service history, and security-related information.
• Medical Devices: Ideal for storing patient data, device configurations, and firmware updates in medical equipment.

Detailed and Complete Alternative Models

• AT24C02: 2 Kilobit capacity, otherwise similar specifications.
• AT24C04: 4 Kilobit capacity, otherwise similar specifications.
• AT24C08: 8 Kilobit capacity, otherwise similar specifications.
• AT24C16: 16 Kilobit capacity, otherwise similar specifications.
• AT24C32: 32 Kilobit capacity, otherwise similar specifications.
• AT24C64: 64 Kilobit capacity, otherwise similar specifications.
• AT24C128: 128 Kilobit capacity, otherwise similar specifications.
• AT24C256: 256 Kilobit capacity, otherwise similar specifications.
• AT24C512: 512 Kilobit capacity, otherwise similar specifications.

(Note: The above list is not exhaustive and there may be other alternative models available.)

---

Word Count: 446 words