Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT24C02A-10PI
詳細を表示 DataSheets

AT24C02A-10PI

Product Overview

Category

AT24C02A-10PI belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

The AT24C02A-10PI chip is primarily used for non-volatile data storage in various electronic devices. It provides a reliable and convenient solution for storing small amounts of data that need to be retained even when power is removed.

Characteristics

  • Non-volatile: The data stored in the AT24C02A-10PI chip is retained even when power is disconnected.
  • Electrically erasable: The chip allows for easy modification and erasure of stored data through electrical signals.
  • Low power consumption: The AT24C02A-10PI operates on low power, making it suitable for battery-powered devices.
  • High reliability: The chip offers robust data retention and endurance characteristics.
  • Small form factor: The AT24C02A-10PI comes in a compact package, making it suitable for space-constrained applications.

Package

The AT24C02A-10PI chip is available in a 8-pin DIP (Dual Inline Package) format.

Essence

The essence of the AT24C02A-10PI chip lies in its ability to provide non-volatile data storage in a compact and reliable package.

Packaging/Quantity

The AT24C02A-10PI chip is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Memory capacity: 2 kilobits (256 bytes)
  • Operating voltage: 1.7V to 5.5V
  • Maximum clock frequency: 400 kHz
  • Write cycle time: 5 ms (maximum)
  • Data retention: 100 years (minimum)
  • Endurance: 1 million write cycles (minimum)

Detailed Pin Configuration

The AT24C02A-10PI chip has the following pin configuration:

  1. A0: Chip address input
  2. A1: Chip address input
  3. A2: Chip address input
  4. GND: Ground connection
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect input
  8. VCC: Power supply voltage

Functional Features

The AT24C02A-10PI chip offers the following functional features:

  • Random access: Allows for reading and writing of specific memory locations.
  • Sequential read: Supports sequential reading of multiple memory locations.
  • Write protection: Provides a write protect feature to prevent accidental modification of stored data.
  • Software and hardware compatibility: The chip is compatible with standard I2C communication protocols, making it easy to integrate into various systems.

Advantages and Disadvantages

Advantages

  • Non-volatile data storage
  • Easy to use and integrate
  • Low power consumption
  • High reliability and endurance
  • Compact form factor

Disadvantages

  • Limited storage capacity (256 bytes)
  • Relatively slow write cycle time

Working Principles

The AT24C02A-10PI chip utilizes electrically erasable programmable read-only memory (EEPROM) technology. It consists of a grid of memory cells that can be individually programmed or erased using electrical signals. The chip communicates with the host system through the I2C bus, allowing for easy data transfer and manipulation.

Detailed Application Field Plans

The AT24C02A-10PI chip finds applications in various electronic devices and systems, including but not limited to:

  1. Consumer electronics: Used for storing device settings, user preferences, and small data sets in devices such as TVs, audio players, and remote controls.
  2. Industrial automation: Employed for storing configuration data, calibration values, and system parameters in industrial control systems and sensors.
  3. Automotive electronics: Utilized for storing vehicle settings, user profiles, and diagnostic information in automotive modules and ECUs (Electronic Control Units).
  4. Medical devices: Used for storing patient data, device configurations, and firmware updates in medical equipment and instruments.

Detailed and Complete Alternative Models

  1. AT24C01A-10PU: 1 kilobit EEPROM chip with similar specifications and features.
  2. AT24C04A-10PI: 4 kilobit EEPROM chip with increased storage capacity.
  3. AT24C08A-10SC: 8 kilobit EEPROM chip with extended memory size.

These alternative models offer different storage capacities to cater to specific application requirements.

Word count: 570 words

技術ソリューションにおける AT24C02A-10PI の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT24C02A-10PI in technical solutions:

  1. Q: What is AT24C02A-10PI? A: AT24C02A-10PI is a 2-wire serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 2 kilobits (256 bytes).

  2. Q: What are some common applications of AT24C02A-10PI? A: AT24C02A-10PI is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, sensors, and embedded systems.

  3. Q: How does AT24C02A-10PI communicate with other devices? A: AT24C02A-10PI uses a 2-wire serial interface, also known as I2C (Inter-Integrated Circuit), to communicate with other devices.

  4. Q: What is the operating voltage range of AT24C02A-10PI? A: The operating voltage range of AT24C02A-10PI is typically between 1.7V and 5.5V.

  5. Q: Can AT24C02A-10PI be easily integrated into existing circuits? A: Yes, AT24C02A-10PI comes in an 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package, making it easy to integrate into existing circuits.

  6. Q: How much data can AT24C02A-10PI store? A: AT24C02A-10PI has a storage capacity of 2 kilobits, which is equivalent to 256 bytes.

  7. Q: Is AT24C02A-10PI capable of performing write operations? A: Yes, AT24C02A-10PI supports both write and read operations, allowing data to be written to and read from the EEPROM.

  8. Q: What is the maximum clock frequency supported by AT24C02A-10PI? A: The maximum clock frequency supported by AT24C02A-10PI is 400 kHz.

  9. Q: Can AT24C02A-10PI retain data during power loss? A: Yes, AT24C02A-10PI is non-volatile, meaning it can retain data even when power is lost.

  10. Q: Are there any limitations or precautions when using AT24C02A-10PI? A: Some limitations include a limited number of write cycles (typically around 1 million) and a maximum data retention period of 100 years. Precautions include avoiding excessive voltage or current during operation and ensuring proper handling to prevent electrostatic discharge.