AT24C04AN-10SI-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The AT24C04AN-10SI-2.7 is available in a small outline integrated circuit (SOIC) package.
The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact form factor.
The AT24C04AN-10SI-2.7 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips.
The AT24C04AN-10SI-2.7 has a total of 8 pins, which are as follows:
The AT24C04AN-10SI-2.7 operates based on the principles of EEPROM technology. It uses a combination of floating gate transistors and electrically isolated gates to store and retrieve data. When data is written, charges are trapped in the floating gate, altering the transistor's behavior. These charges can be removed during the erasing process, allowing new data to be written.
The AT24C04AN-10SI-2.7 finds applications in various fields, including: 1. Embedded Systems: Used for storing configuration data, firmware updates, and calibration parameters in microcontrollers. 2. Automotive Electronics: Employed for storing critical data, such as vehicle identification numbers (VINs) and mileage records. 3. Industrial Automation: Used for storing production data, sensor calibration values, and system configuration settings. 4. Consumer Electronics: Found in devices like smart TVs, set-top boxes, and digital cameras for storing user preferences and settings.
These alternative models provide different storage capacities and additional features to cater to specific application requirements.
In conclusion, the AT24C04AN-10SI-2.7 is a compact and reliable EEPROM chip that offers non-volatile data storage for
Sure! Here are 10 common questions and answers related to the application of AT24C04AN-10SI-2.7 in technical solutions:
Q: What is AT24C04AN-10SI-2.7? A: AT24C04AN-10SI-2.7 is a 4-kilobit (4K) serial EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuit.
Q: What is the operating voltage range for AT24C04AN-10SI-2.7? A: The operating voltage range for AT24C04AN-10SI-2.7 is 2.7V to 5.5V.
Q: What is the storage capacity of AT24C04AN-10SI-2.7? A: AT24C04AN-10SI-2.7 has a storage capacity of 512 bytes, organized into 32 pages of 16 bytes each.
Q: How can I interface with AT24C04AN-10SI-2.7? A: AT24C04AN-10SI-2.7 uses a two-wire I2C (Inter-Integrated Circuit) serial interface for communication with microcontrollers or other devices.
Q: What is the maximum clock frequency supported by AT24C04AN-10SI-2.7? A: AT24C04AN-10SI-2.7 supports a maximum clock frequency of 400 kHz.
Q: Can I write data to AT24C04AN-10SI-2.7 more than once? A: Yes, AT24C04AN-10SI-2.7 supports multiple writes. Each memory location can be written and rewritten individually.
Q: Is AT24C04AN-10SI-2.7 capable of hardware write protection? A: Yes, AT24C04AN-10SI-2.7 has a built-in write protection mechanism that can be enabled using the WP (Write Protect) pin.
Q: What is the typical endurance of AT24C04AN-10SI-2.7? A: AT24C04AN-10SI-2.7 has a typical endurance of 1 million write cycles per byte.
Q: Can I operate AT24C04AN-10SI-2.7 at high temperatures? A: Yes, AT24C04AN-10SI-2.7 is rated for industrial temperature range (-40°C to +85°C), making it suitable for various applications.
Q: What are some common applications of AT24C04AN-10SI-2.7? A: AT24C04AN-10SI-2.7 is commonly used in applications such as data logging, configuration storage, security keys, and small data storage in embedded systems.
Please note that these answers are general and may vary depending on specific requirements and use cases.