The AT24C04BY6-YH-T has the following pin configuration:
```
| | | 1 2 3 4 | | | | 8 7 6 5 | |_______________| ```
Advantages: - Compact size - Wide operating voltage range - High data retention - Multiple page write modes for efficient data transfer
Disadvantages: - Limited memory capacity (4K bits)
The AT24C04BY6-YH-T uses a combination of CMOS technology and EEPROM memory cells to store and retrieve data. It communicates with other devices through the I2C-compatible serial interface, allowing for easy data transfer. The IC operates within a specified voltage range and provides non-volatile memory storage, ensuring data retention even when power is disconnected.
The AT24C04BY6-YH-T can be used in various electronic devices that require non-volatile memory storage, such as:
These alternative models provide options with varying memory capacities to suit different application requirements.
Word count: 526 words
Sure! Here are 10 common questions and answers related to the application of AT24C04BY6-YH-T in technical solutions:
Q: What is AT24C04BY6-YH-T? A: AT24C04BY6-YH-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology. It has a storage capacity of 4 kilobits (512 bytes) and operates on the I2C (Inter-Integrated Circuit) bus.
Q: What are the typical applications of AT24C04BY6-YH-T? A: AT24C04BY6-YH-T is commonly used for storing configuration data, calibration data, or small amounts of non-volatile memory in various electronic devices such as microcontrollers, sensors, and industrial control systems.
Q: How does AT24C04BY6-YH-T communicate with other devices? A: AT24C04BY6-YH-T communicates using the I2C protocol, which allows it to connect with other devices on the same bus, such as microcontrollers or other I2C-compatible chips.
Q: What is the operating voltage range of AT24C04BY6-YH-T? A: AT24C04BY6-YH-T operates within a voltage range of 1.7V to 5.5V, making it compatible with a wide range of power supply voltages.
Q: Can AT24C04BY6-YH-T be easily integrated into existing circuits? A: Yes, AT24C04BY6-YH-T comes in a standard 8-pin SOIC (Small Outline Integrated Circuit) package, which makes it easy to solder onto PCBs (Printed Circuit Boards) or integrate into existing circuits.
Q: Does AT24C04BY6-YH-T support write protection? A: Yes, AT24C04BY6-YH-T provides hardware write protection by using a dedicated pin (WP) that can be connected to a microcontroller's GPIO (General Purpose Input/Output) pin to control write access.
Q: What is the maximum data transfer rate of AT24C04BY6-YH-T? A: The maximum data transfer rate of AT24C04BY6-YH-T is 400 kilobits per second (kbps), allowing for relatively fast read and write operations.
Q: Can AT24C04BY6-YH-T operate in extreme temperature conditions? A: Yes, AT24C04BY6-YH-T has an extended temperature range of -40°C to +125°C, making it suitable for applications that require operation in harsh environments.
Q: Is AT24C04BY6-YH-T resistant to data corruption or loss during power outages? A: Yes, AT24C04BY6-YH-T uses non-volatile memory technology, which means that data stored in the chip remains intact even when power is lost or turned off.
Q: Are there any limitations to consider when using AT24C04BY6-YH-T? A: One limitation is the limited storage capacity of 4 kilobits, which may not be sufficient for applications requiring large amounts of data storage. Additionally, the I2C bus has limitations on the maximum number of devices that can be connected, so care must be taken when designing the system architecture.