AT24C08N-10SI-2.5

Overview

Product Category

AT24C08N-10SI-2.5 belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuits.

Use

This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

• Capacity: 8 kilobits (1 kilobyte)
• Interface: I2C (Inter-Integrated Circuit)
• Operating Voltage: 2.5V
• Speed Grade: 10 MHz

Package

AT24C08N-10SI-2.5 is available in an 8-pin Small Outline Integrated Circuit (SOIC) package.

Essence

The essence of this product lies in its ability to store and retrieve digital information reliably, even when power is removed from the device.

Packaging/Quantity

AT24C08N-10SI-2.5 is typically packaged in reels or tubes, with a quantity of 2500 units per reel or tube.

Specifications

• Memory Organization: 1024 bytes x 8 bits
• Write Cycle Time: 5 ms (maximum)
• Data Retention: 100 years (minimum)
• Endurance: 1 million write cycles (minimum)
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of AT24C08N-10SI-2.5 is as follows:

```

---

| | | 1 8 | | | | 2 7 | | | | 3 6 | | | | 4 5 | |___________| ```

1. A0: Chip Address Input
2. A1: Chip Address Input
3. A2: Chip Address Input
4. GND: Ground
5. SDA: Serial Data Input/Output
6. SCL: Serial Clock Input
7. WP: Write Protect Input
8. VCC: Power Supply

Functional Features

• Random Read: Allows reading of any byte within the memory array.
• Sequential Read: Enables sequential reading of multiple bytes.
• Byte Write: Supports individual byte write operations.
• Page Write: Facilitates writing of up to 8 bytes in a single write operation.
• Software Write Protection: Provides write protection for the entire memory or selected portions.
• Hardware Write Protection: Allows write protection using the WP pin.

Advantages and Disadvantages

Advantages

• Non-volatile storage: Retains data even when power is lost.
• High endurance: Can withstand frequent write cycles.
• Compact package: Comes in a small form factor, suitable for space-constrained applications.
• Low power consumption: Operates at low voltage and consumes minimal power.

Disadvantages

• Limited capacity: With only 8 kilobits of storage, it may not be sufficient for certain applications requiring larger memory.
• Relatively slow write cycle time: The 5 ms write cycle time may be slower compared to other EEPROMs with higher speed grades.

Working Principles

AT24C08N-10SI-2.5 utilizes an I2C interface for communication with the host device. It employs a floating gate transistor technology that allows for non-volatile storage of digital information. The memory cells are organized into a matrix, with each cell capable of storing one bit of data. The stored data can be read, written, and erased electronically.

Detailed Application Field Plans

AT24C08N-10SI-2.5 finds applications in various fields, including but not limited to: 1. Embedded systems: Used for storing configuration data and firmware updates. 2. Automotive electronics: Employed for storing vehicle settings and sensor calibration data. 3. Industrial automation: Utilized for storing parameter settings and production data. 4. Consumer electronics: Integrated into devices like smart TVs, set-top boxes, and gaming consoles for storing user preferences and settings.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT24C08N-10SI-2.5 include: 1. AT24C01A: 1 kilobit capacity, I2C interface, 1 MHz speed grade. 2. AT24C16N: 16 kilobit capacity, I2C interface, 10 MHz speed grade. 3. AT24C64C: 64 kilobit capacity, I2C interface, 1 MHz speed grade.

These alternative models provide options with varying capacities and speed grades to suit different application requirements.

In conclusion, AT24C08N-10SI-2.5 is a Serial EEPROM integrated