AT24C32AN-10SU-2.7 belongs to the category of EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuits.
This product is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.
The AT24C32AN-10SU-2.7 is available in an 8-pin small outline package (SOIC).
The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact and low-power package.
The AT24C32AN-10SU-2.7 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The AT24C32AN-10SU-2.7 has the following pin configuration:
The AT24C32AN-10SU-2.7 utilizes EEPROM technology, which consists of floating gate transistors that can trap and store electrical charges. These charges represent binary data, which can be read, erased, and reprogrammed using electrical signals. The I2C interface facilitates communication between the device and the host microcontroller, enabling seamless data transfer.
The AT24C32AN-10SU-2.7 finds application in various fields, including:
These alternative models provide increased storage options based on specific application requirements.
In conclusion, the AT24C32AN-10SU-2.7 is a reliable and versatile EEPROM integrated circuit that offers non-volatile data storage in
Sure! Here are 10 common questions and answers related to the application of AT24C32AN-10SU-2.7 in technical solutions:
Q: What is the AT24C32AN-10SU-2.7? A: The AT24C32AN-10SU-2.7 is a 32Kbit (4K x 8) Serial Electrically Erasable Programmable Read-Only Memory (EEPROM) with I2C interface.
Q: What is the operating voltage range for the AT24C32AN-10SU-2.7? A: The operating voltage range for this EEPROM is 1.7V to 5.5V.
Q: How can I communicate with the AT24C32AN-10SU-2.7? A: The AT24C32AN-10SU-2.7 uses the I2C protocol for communication, which requires only two wires (SDA and SCL) to connect to a microcontroller or other devices.
Q: What is the maximum clock frequency supported by the AT24C32AN-10SU-2.7? A: The AT24C32AN-10SU-2.7 supports a maximum clock frequency of 400kHz.
Q: How much data can be stored in the AT24C32AN-10SU-2.7? A: The AT24C32AN-10SU-2.7 has a storage capacity of 32 kilobits, which is equivalent to 4096 bytes or 4 kilobytes.
Q: Can I write data to the AT24C32AN-10SU-2.7 multiple times? A: Yes, the AT24C32AN-10SU-2.7 supports both write and read operations, allowing you to write data multiple times.
Q: What is the typical endurance of the AT24C32AN-10SU-2.7? A: The AT24C32AN-10SU-2.7 has a typical endurance of 1 million write cycles.
Q: Can I use the AT24C32AN-10SU-2.7 in harsh environments? A: Yes, the AT24C32AN-10SU-2.7 is designed to operate in industrial temperature ranges (-40°C to +85°C), making it suitable for harsh environments.
Q: Does the AT24C32AN-10SU-2.7 have any built-in security features? A: No, the AT24C32AN-10SU-2.7 does not have any built-in security features. It is a standard EEPROM without hardware encryption or protection mechanisms.
Q: Are there any application examples for the AT24C32AN-10SU-2.7? A: Yes, the AT24C32AN-10SU-2.7 can be used in various applications such as data logging, configuration storage, device identification, and parameter storage in embedded systems.
Please note that these answers are general and may vary depending on the specific requirements and implementation of the AT24C32AN-10SU-2.7 in your technical solution.