画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT25020AN-10SI-1.8-T

AT25020AN-10SI-1.8-T

Product Overview

Category

AT25020AN-10SI-1.8-T belongs to the category of Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.

Use

This product is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile memory: The data stored in the AT25020AN-10SI-1.8-T remains intact even when power is removed.
  • Electrically erasable and programmable: The memory can be erased and reprogrammed electrically, allowing for easy updates and modifications.
  • Small form factor: The chip is compact and lightweight, making it suitable for space-constrained applications.
  • Low power consumption: The AT25020AN-10SI-1.8-T operates on low power, extending the battery life of portable devices.

Package

The AT25020AN-10SI-1.8-T comes in a standard 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for critical data in electronic systems.

Packaging/Quantity

The AT25020AN-10SI-1.8-T is typically packaged in reels containing 2,000 units per reel.

Specifications

  • Memory capacity: 2,048 bits (256 bytes)
  • Operating voltage: 1.8V
  • Interface: Serial Peripheral Interface (SPI)
  • Maximum clock frequency: 10 MHz
  • Write endurance: 1 million cycles
  • Data retention: 100 years

Detailed Pin Configuration

The AT25020AN-10SI-1.8-T has the following pin configuration:

  1. Chip Select (CS)
  2. Serial Clock (SCK)
  3. Serial Data Input/Output (SI/O)
  4. Ground (GND)
  5. Write Protect (WP)
  6. VCC Power Supply (VCC)
  7. Hold (HOLD)
  8. Not Connected (NC)

Functional Features

  • Byte-level read and write operations: The AT25020AN-10SI-1.8-T allows for individual byte access, enabling efficient data manipulation.
  • Hardware write protection: The Write Protect (WP) pin can be used to prevent accidental writes to the memory, enhancing data security.
  • Sequential and random access modes: The chip supports both sequential and random access, providing flexibility in accessing stored data.
  • Software and hardware reset: The device can be reset using software commands or by toggling the power supply, ensuring reliable operation.

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices.
  • Easy to integrate into existing electronic systems due to its standard interface.
  • High write endurance and long data retention ensure data integrity over extended periods.
  • Cost-effective solution for non-volatile storage needs.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to some alternative models.
  • Susceptible to electromagnetic interference (EMI) due to its small form factor.

Working Principles

The AT25020AN-10SI-1.8-T utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. It operates based on the principle of trapping charges within a floating gate transistor structure. When a voltage is applied, electrons are either trapped or released, representing binary states (0 or 1). This enables the storage and retrieval of digital information.

Detailed Application Field Plans

The AT25020AN-10SI-1.8-T finds applications in various fields, including but not limited to: - Automotive electronics: Used for storing vehicle configuration data and firmware updates. - Industrial automation: Enables parameter storage and device configuration in control systems. - Medical devices: Stores patient information, calibration data, and device settings. - Consumer electronics: Used in smart TVs, set-top boxes, and gaming consoles for firmware storage and system configuration.

Detailed and Complete Alternative Models

Some alternative models to the AT25020AN-10SI-1.8-T include: - AT25040AN-10SI-1.8-T: Offers double the memory capacity (4,096 bits) with similar specifications. - AT25080AN-10SI-1.8-T: Provides four times the memory capacity (8,192 bits) with comparable characteristics. - AT25128AN-10SI-1.8-T: Offers eight times the memory capacity (16,384 bits) while maintaining compatibility.

These alternative models provide options for higher storage requirements while maintaining compatibility with the same interface and package.

Word count: 609 words

技術ソリューションにおける AT25020AN-10SI-1.8-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT25020AN-10SI-1.8-T in technical solutions:

Q1: What is the AT25020AN-10SI-1.8-T? A1: The AT25020AN-10SI-1.8-T is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) integrated circuit.

Q2: What is the storage capacity of the AT25020AN-10SI-1.8-T? A2: The AT25020AN-10SI-1.8-T has a storage capacity of 2,048 bits or 256 bytes.

Q3: What voltage does the AT25020AN-10SI-1.8-T operate at? A3: The AT25020AN-10SI-1.8-T operates at a voltage of 1.8V.

Q4: What is the maximum clock frequency supported by the AT25020AN-10SI-1.8-T? A4: The AT25020AN-10SI-1.8-T supports a maximum clock frequency of 10 MHz.

Q5: Can the AT25020AN-10SI-1.8-T be used for data storage in embedded systems? A5: Yes, the AT25020AN-10SI-1.8-T is commonly used for data storage in various embedded systems.

Q6: Is the AT25020AN-10SI-1.8-T compatible with I2C communication protocol? A6: Yes, the AT25020AN-10SI-1.8-T uses the I2C (Inter-Integrated Circuit) communication protocol.

Q7: Can the AT25020AN-10SI-1.8-T be used in automotive applications? A7: Yes, the AT25020AN-10SI-1.8-T is designed to meet the requirements of automotive applications.

Q8: Does the AT25020AN-10SI-1.8-T have built-in write protection features? A8: Yes, the AT25020AN-10SI-1.8-T has hardware and software write protection features to prevent accidental data modification.

Q9: What is the operating temperature range of the AT25020AN-10SI-1.8-T? A9: The AT25020AN-10SI-1.8-T has an operating temperature range of -40°C to +85°C.

Q10: Can the AT25020AN-10SI-1.8-T be reprogrammed multiple times? A10: Yes, the AT25020AN-10SI-1.8-T can be electrically erased and reprogrammed multiple times during its lifetime.

Please note that these answers are based on general information about the AT25020AN-10SI-1.8-T and may vary depending on specific application requirements.