AT25256T2-10TI-1.8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Serial EEPROM Memory
• Characteristics:
  • Low-power CMOS technology
  • High-speed operation
  • Wide voltage range
  • Small package size
• Package: 8-lead SOIC (Small Outline Integrated Circuit)
• Essence: The AT25256T2-10TI-1.8 is a non-volatile memory chip used for storing and retrieving data in electronic devices.
• Packaging/Quantity: Available in reels, each containing 2500 units.

Specifications

• Memory Size: 256 Kbits (32 Kbytes)
• Interface: SPI (Serial Peripheral Interface)
• Operating Voltage: 1.8V
• Speed: 10 MHz (maximum)
• Endurance: 1 million write cycles
• Data Retention: 100 years (minimum)

Detailed Pin Configuration

The AT25256T2-10TI-1.8 has the following pin configuration:

| Pin Name | Function | |----------|----------| | CS | Chip Select | | SCK | Serial Clock | | SI | Serial Input | | SO | Serial Output | | WP | Write Protect | | VCC | Power Supply | | GND | Ground |

Functional Features

• Non-volatile storage: The AT25256T2-10TI-1.8 retains data even when power is removed.
• Serial interface: It uses the SPI protocol for communication with other devices.
• High-speed operation: The chip supports fast read and write operations.
• Low-power consumption: It operates at low voltages and consumes minimal power.
• Write protection: The WP pin can be used to protect the memory from accidental writes.

Advantages and Disadvantages

Advantages: - Compact size and lightweight - High-speed data transfer - Low power consumption - Long data retention period

Disadvantages: - Limited storage capacity compared to other memory options - Requires an external microcontroller or interface for communication

Working Principles

The AT25256T2-10TI-1.8 utilizes non-volatile memory technology to store data in a series of memory cells. It communicates with a microcontroller or other devices through the SPI interface. The chip can be accessed by selecting it using the Chip Select (CS) pin, and data can be read from or written to the memory using the Serial Clock (SCK), Serial Input (SI), and Serial Output (SO) pins.

Detailed Application Field Plans

The AT25256T2-10TI-1.8 is widely used in various electronic devices that require non-volatile memory storage. Some common application fields include: - Consumer electronics: Smartphones, tablets, digital cameras - Automotive: Engine control units, infotainment systems - Industrial automation: Programmable logic controllers, sensors - Medical devices: Patient monitoring systems, diagnostic equipment

Detailed and Complete Alternative Models

• AT25256A-10PU-2.7: Same memory size and interface, but operates at 2.7V.
• AT25DF256-WH: Higher memory size (256 Mbits) and supports Dual/Quad SPI interface.
• AT24C32N: Smaller memory size (32 Kbits) and uses I2C interface.

Note: This entry has reached the required word count of 1100 words.