画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT27BV040-12TC

AT27BV040-12TC

Product Overview

Category

AT27BV040-12TC belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, embedded systems, and consumer electronics.

Characteristics

  • Non-volatile: The AT27BV040-12TC retains stored data even when power is removed.
  • High capacity: It offers a storage capacity of 4 megabits (512 kilobytes).
  • Fast access time: The device has a fast access time of 120 nanoseconds.
  • Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.

Package

The AT27BV040-12TC is available in a standard 32-pin Thin Small Outline Package (TSOP).

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic devices, ensuring data integrity even during power interruptions or system failures.

Packaging/Quantity

The AT27BV040-12TC is typically packaged in reels containing multiple units. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Type: Non-volatile Flash
  • Capacity: 4 Megabits (512 Kilobytes)
  • Access Time: 120 Nanoseconds
  • Operating Voltage: 2.7V - 3.6V
  • Temperature Range: -40°C to +85°C
  • Interface: Parallel

Detailed Pin Configuration

The AT27BV040-12TC features a 32-pin configuration with the following pin assignments:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. A8 - Address Input
  10. A9 - Address Input
  11. A10 - Address Input
  12. A11 - Address Input
  13. A12 - Address Input
  14. A13 - Address Input
  15. A14 - Address Input
  16. A15 - Address Input
  17. CE - Chip Enable Input
  18. OE - Output Enable Input
  19. WE - Write Enable Input
  20. I/O0 - Data Input/Output
  21. I/O1 - Data Input/Output
  22. I/O2 - Data Input/Output
  23. I/O3 - Data Input/Output
  24. I/O4 - Data Input/Output
  25. I/O5 - Data Input/Output
  26. I/O6 - Data Input/Output
  27. I/O7 - Data Input/Output
  28. VCC - Power Supply
  29. GND - Ground
  30. NC - No Connection
  31. NC - No Connection
  32. NC - No Connection

Functional Features

  • High-speed data transfer: The AT27BV040-12TC offers fast read and write operations, enabling efficient data transfer.
  • Sector erase capability: It allows for selective erasure of specific memory sectors, enhancing flexibility in data management.
  • Low power consumption: The device operates at low power levels, reducing energy consumption and extending battery life.
  • Reliable data retention: The non-volatile nature of the memory ensures that stored data remains intact even during power loss or system failures.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data integrity.
  • High capacity for storing large amounts of data.
  • Fast access time enables quick data retrieval.
  • Low power consumption prolongs battery life.
  • Sector erase capability enhances data management flexibility.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per unit compared to some alternatives.
  • Limited endurance in terms of write cycles.

Working Principles

The AT27BV040-12TC utilizes flash memory technology for data storage. It employs a combination of floating-gate transistors and charge trapping mechanisms to store and retrieve data. When data is written, charges are trapped within the floating gate, altering the transistor's behavior. These charges can be later read by applying appropriate voltage levels to the memory cells. The non-volatile nature of the memory ensures that the stored data remains intact even when power is removed.

Detailed Application Field Plans

The AT27BV040-12TC finds applications in various fields, including:

  1. Microcontrollers: Used for program storage in microcontroller-based systems.
  2. Embedded Systems: Provides non-volatile storage for firmware and configuration data in embedded systems.
  3. Consumer Electronics: Used in devices such as set-top boxes, digital cameras, and portable media players for data storage.

Detailed and Complete Alternative Models

Some alternative models to the AT27BV040-12

技術ソリューションにおける AT27BV040-12TC の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT27BV040-12TC in technical solutions:

  1. Q: What is AT27BV040-12TC? A: AT27BV040-12TC is a specific type of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Atmel.

  2. Q: What is the capacity of AT27BV040-12TC? A: The AT27BV040-12TC has a capacity of 4 megabits, which is equivalent to 512 kilobytes.

  3. Q: What does the "12TC" in AT27BV040-12TC signify? A: The "12TC" represents the access time of the chip, which is 120 nanoseconds.

  4. Q: What are some typical applications of AT27BV040-12TC? A: AT27BV040-12TC is commonly used in various electronic devices such as microcontrollers, industrial control systems, automotive electronics, and consumer electronics.

  5. Q: How does AT27BV040-12TC connect to a microcontroller or other devices? A: AT27BV040-12TC uses a standard parallel interface, typically connected using address lines, data lines, control signals, and power supply connections.

  6. Q: Can AT27BV040-12TC be reprogrammed multiple times? A: Yes, AT27BV040-12TC is an EEPROM, which means it can be electrically erased and reprogrammed multiple times.

  7. Q: What is the operating voltage range for AT27BV040-12TC? A: The operating voltage range for AT27BV040-12TC is typically between 2.7V and 5.5V.

  8. Q: Does AT27BV040-12TC require any special programming equipment? A: No, AT27BV040-12TC can be programmed using standard EEPROM programmers or microcontroller-based programming circuits.

  9. Q: What is the temperature range for AT27BV040-12TC? A: The temperature range for AT27BV040-12TC is typically between -40°C and +85°C.

  10. Q: Are there any specific precautions to consider when using AT27BV040-12TC? A: It is important to handle AT27BV040-12TC chips with proper electrostatic discharge (ESD) precautions to prevent damage. Additionally, following the manufacturer's datasheet and guidelines for programming and erasing operations is recommended.

Please note that these answers are general and may vary depending on the specific requirements and documentation provided by Atmel for the AT27BV040-12TC chip.