画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT28BV64-25SC

AT28BV64-25SC

Product Overview

Category

AT28BV64-25SC belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving data in electronic systems.

Characteristics

  • Non-volatile: Retains data even when power is turned off.
  • High capacity: The AT28BV64-25SC has a storage capacity of 64 kilobits.
  • Low power consumption: Designed to operate with minimal power requirements.
  • Fast access time: Provides quick access to stored data.
  • Reliable: Offers high endurance and data retention capabilities.

Package

The AT28BV64-25SC is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of AT28BV64-25SC lies in its ability to provide reliable, non-volatile memory storage in electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of AT28BV64-25SC chips.

Specifications

  • Storage Capacity: 64 kilobits
  • Operating Voltage: 2.7V - 3.6V
  • Access Time: 250 nanoseconds
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Parallel

Detailed Pin Configuration

The AT28BV64-25SC features a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. A8 - Address Input
  10. A9 - Address Input
  11. A10 - Address Input
  12. A11 - Address Input
  13. A12 - Address Input
  14. A13 - Address Input
  15. A14 - Address Input
  16. /OE - Output Enable
  17. /WE - Write Enable
  18. /CE - Chip Enable
  19. DQ0 - Data Input/Output
  20. DQ1 - Data Input/Output
  21. DQ2 - Data Input/Output
  22. DQ3 - Data Input/Output
  23. DQ4 - Data Input/Output
  24. DQ5 - Data Input/Output
  25. DQ6 - Data Input/Output
  26. DQ7 - Data Input/Output
  27. VCC - Power Supply
  28. GND - Ground

Functional Features

  • Random Access: Allows for direct access to any memory location.
  • Byte-Writable: Enables individual byte-level write operations.
  • Erasable: Supports full chip erasure or sector-based erasure.
  • Hardware and Software Protection: Provides security features to prevent unauthorized access.
  • Low Power Standby Mode: Reduces power consumption when not in use.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • High capacity allows for storing a significant amount of data.
  • Fast access time enables quick retrieval of information.
  • Low power consumption prolongs battery life in portable devices.
  • Reliable performance ensures data integrity over extended periods.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively slower access times compared to volatile memory types.
  • Higher cost per bit compared to some alternative memory options.

Working Principles

The AT28BV64-25SC utilizes flash memory technology to store and retrieve data. It employs a combination of floating-gate transistors and electrically isolated gates to trap and release electrons, representing binary data. The stored information can be accessed by sending appropriate address signals and control signals to the device.

Detailed Application Field Plans

The AT28BV64-25SC finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

  1. AT28C64B-15PU: Similar specifications with a lower access time of 150 nanoseconds.
  2. AT28HC64B-12PC: Higher endurance and extended temperature range (-40°C to +125°C).
  3. AT28LV64B-20JI: Lower power consumption and wider operating voltage range (2.7V - 5.5V).

These alternative models offer similar functionality and can be considered based on specific requirements and constraints.

In conclusion, the AT28BV64-25SC is a non-volatile memory device that provides reliable storage and retrieval of data in electronic systems. With its high capacity, low power consumption, and fast access time, it offers several advantages for

技術ソリューションにおける AT28BV64-25SC の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT28BV64-25SC in technical solutions:

  1. Question: What is the AT28BV64-25SC?
    Answer: The AT28BV64-25SC is a 64K (8K x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Atmel.

  2. Question: What is the operating voltage range for the AT28BV64-25SC?
    Answer: The AT28BV64-25SC operates within a voltage range of 2.7V to 3.6V.

  3. Question: What is the maximum clock frequency supported by the AT28BV64-25SC?
    Answer: The AT28BV64-25SC supports a maximum clock frequency of 25 MHz.

  4. Question: Can the AT28BV64-25SC be used for storing program code?
    Answer: Yes, the AT28BV64-25SC can be used for storing program code as it is an EEPROM memory chip.

  5. Question: How many write cycles can the AT28BV64-25SC endure?
    Answer: The AT28BV64-25SC can endure a minimum of 100,000 write cycles.

  6. Question: Does the AT28BV64-25SC support byte-level read and write operations?
    Answer: Yes, the AT28BV64-25SC supports byte-level read and write operations, allowing for efficient data manipulation.

  7. Question: What is the typical access time for reading data from the AT28BV64-25SC?
    Answer: The typical access time for reading data from the AT28BV64-25SC is 90 ns.

  8. Question: Can the AT28BV64-25SC be used in automotive applications?
    Answer: Yes, the AT28BV64-25SC is suitable for automotive applications as it can withstand a wide temperature range (-40°C to 125°C).

  9. Question: Does the AT28BV64-25SC support hardware data protection?
    Answer: Yes, the AT28BV64-25SC supports hardware data protection through the use of a write protect pin.

  10. Question: Can the AT28BV64-25SC be used in battery-powered devices?
    Answer: Yes, the AT28BV64-25SC is suitable for battery-powered devices due to its low power consumption characteristics.

Please note that these answers are based on general knowledge about the AT28BV64-25SC and may vary depending on specific application requirements.